Complaint
| Model | Tmax17Q-I | TMAX17Q-II | TMAX17Q-III |
| Power | 4 KW | 8KW | 16KW |
| Chamber size (mm) | 160X150X150 | 300X200X200 | 400X300X300 |
Overall dimensions (mm) | 550X470X810 | 600X 610X860 | 700X 710X1355 |
| Voltage | 220V | 380V | |
| phase | one-phase | one-phase | |
| Heating element | Type 1800 molybdenum wire | ||
| Control mode | UAV program temperature control instrument (standard) 1, 30-stage program temperature control intelligent PID adjustment. 2, with over-temperature protection When the electric protection furnace is over-temperature or broken, the electric furnace heating circuit is automatically cut off, (when the electric furnace temperature exceeds 1720 degrees or the thermocouple is blown, The AC relay on the main circuit will be automatically disconnected, the main circuit will be disconnected, the ON light on the panel will be off, the OFF light will be on, and the electric furnace will be limited. 3, with 485 communication interface (standard when purchasing software) 4, with power-off protection function, that is, when the power is turned off after the power is turned off, the program does not start from the starting temperature, but rises from the power-off time. 5. The instrument has the function of self-setting temperature | ||
| Chamber materials | Type 1800 alumina polycrystalline fiber (over 95% alumina content) imported from Japan | ||
| control precision | +/- 1 ºC | ||
| flip-flop | Phase shift trigger (with soft start and current limit function) Current limiting function: No matter how to adjust the heating time, the secondary current of our electric furnace after passing through the transformer is limited to 160A, which has limited protection of the equipment, no matter how you operate, it will not burn out the equipment. Soft start function: the current will increase slowly when starting up, and the impact on the heating element is small, which is beneficial to the extension of the life of the heating element. | ||
| electric appliance | Zhejiang chint | ||
| silicon controlled | 106 / 16E SEMIKRON | ||
| maximum temperature | 1600 ºC | ||
| rated temperature | 1550 ºC | ||
| heating rate | ≤20 ºC/ Min (can be modified as required) | ||
| Recommended heating rate | ≤10 ºC/ Min | ||
| Thermocouple Type | Type B | ||
| Vacuum pump (optional) | | ||
| air switch | The furnace body is equipped with an air switch | ||
| Explosion-proof valve (optional) | Electronic explosion-proof pressure can be set as required | ||
| Identification | |||
| Peripheral surface temperature | ≤45ºC | ||
| Item | Qua |
| · Atmosphere furnace | 1 |
| K type thermocouple | 1 |
| Alumina thermal cushion block | 1 |
| Furnace door block | 1 |
| Stainless steel clamp | 1 |
| Thermal gloves | 1 |
| Alumina crucible | 1 |
| 485 computer interface port (optional) | 1 |
| Immersible pump | 1 |
