Complaint
The timer switch a kind of time-controller, mainly applied in controlling variety of electrical equipment. Which could switch on and off various kinds of electric equipment at a preset time automatically. It is easy to operate, and widely used in controlling system, such as street lighting, mechanical equipments, advertisements lamp box, breeding, irrigation, Lighting, water heater,agriculture facilities and broadcasting equipment .
Features
1 With seconds control function
2 can be batch set the switch on/off time in the factory if customers need
3 battery storage time available for 4 years
4 28 on/off
5 With lock function
Characteristicsf
| Power Voltage | 220VAC/50-60Hz+/-15%,other voltage could be made |
| Inside Battery | 1.2VDC/40MAH (It could work 3-4 years without battery, Rechargeable) |
| Electricity Consumption | Appr.1.5VA |
| Time error | less than 1 second per day |
| Time on/off | max 28 times recycle per day |
| Environment Temperature | minus 25 degree until 60 degree |
| Environment Humidity | 45-85% RH |
| Mechanical Lifetime | 3,000,000 times |
| Dimension | 98*55*44mm |
| Installation | with screw M3,3pcs |
1- Press the buttom of clock,meanwhile press"date,hour, min" to adjust the time
2- Set on/off time
| Step | Button | The program set |
| 1 | Press(manuel)button | The screen show"auto-on-auto-off-suto" |
| 2 | Press(set)button | Start to set the on.(show 1 on) |
| 3 | Press(week)button | Set the week |
| 4 | Press(hour)button | Set "hour" |
| 5 | Press(min)button | Set "min" |
| 6 | Press(sec)button | Set "sec" |
| 7 | Press(set)button | Start to set the off |
| 8 | Repeat step2-6 | Set more on/off time |
| 9 | Press(clock)button | After setting,return to the local time |
1- It should tighten the screw, to against the contact heating when the big current.
2- Control input wires is 220VAC 50/60HZ,it could not work with the voltage of 380VAC.
3- The voltage 12V,24V,AC110V,380V, could be made.
4- The control is on red light when the electricty is on.Red light and green light is on the same time when the load has the eletricity output.
5- The time set, it could not be mixed to set.It should follow the time sequence.
Any requirements or question,welcome to "Send" us an e-mail Now!!!
