Complaint
Main Performance & Structure Characteristics
1. Film bag automatic molding
2. UV sterilization
3. Automatic longitudinal sealing
4. Automatic marking function
5. Adjustable quantitative filling
6. Automatic transverse heat sealing
7. Automatically cut bags and provide a variety of incision options
8. Low viscosity fluid material circulation system
Technical Parameters
| model | SJ-1000 |
| Length of finished bag (mm) | 50-150 |
| Bag width (mm) | 40-150 |
| Packaging film width (mm) | 100-320 |
| Packaging capacity (ml) | 50-500 |
| Packaging speed (bags/h) | 2000-2200 |
| Power (kw) | 1.6 |
| Dimensions (mm) | 880*760*1800 |
| Whole machine weight (kg) | 275 |
Maintenance
1. After use, wash away residual liquid in the pipe with water. Otherwise the residual liquid will be degenerative and affect the quality of product of next production. Remove plastic pipe transfusion and clean it with a brush. Keep it clean and dry.
2. Regularly check moving parts and oiling state and oil the machine with sufficient 20# lubricant or lithium based grease at any time. Otherwise the operation will be out of order and that will severely affect service life of machine.
3. Regularly check the machine and clean away foreign matters on the surface of transverse copper block. It is not allowed to have encrustation on the surface. Otherwise thermal conductivity will be reduced, the temperature of copper will rise, and hot transverse sealing and thermal cutting bag will be out of order.
4. In the case of finding abnormal phenomena, cut off power supply immediately. Restart after troubleshooting.
5. During production in winter with temperature under 0 degree, unfreeze the ice in quantitative pump and the pipes with hot water. Otherwise, connecting rod will be broken or the machine does not work.
6. Single sheet plastic film for the machine should be 80mm thick. The tension strength, even thickness, and lubricating property of film should be guaranteed. The weight of each roll of plastic should be controlled under 18kg (320mm) or 14kg (240mm). Transverse hot sealing temperature should be under 260 degrees. Poor thermal sealing or high failure rate of bag caused by employing single sheet plastic film not recommended by the manufacturer are not within extent of liability borne by the manufacture. Are not within extent of liability borne by the manufacture.
FAQ
Q: Are you a factory or trading company?
