ISO 304 Stainless Steel Fibers and Low Carbon Steel Fibers

Min.Order: 1

Product origin: Huzhou, Zhejiang, China

Infringement complaint:

Complaint

US$ 1500 ~ 1800

Description

Polypropylene ( PP ) Fiber --Monofilament Form

PROPERTIES:

Hanrui PP fiber monofilament was produced by advanced technology for fiber spinning, modified by adding functional additives and special surface-treating. Mixing into cement concrete, mortar, plaster etc...It has many advantages such as good dispersing, better water affinity, and strong linking force.

It is suited to reinforce and crack-resist to every kinds of cement concrete and mortar, specially used in engineering of building surface, floor, wall etc…..

SPECIFICATIONS:

Raw Material	Polypropylene	Crack Elongation	20+/-5%
Fiber Type	monofilament	Fiber Diameter	20um-30um
Melting Point(C Deg.)	160 - 170	Density(g/cm3)	0.91+/-0.01
Acid &Alkali Resistance	Strong	Tensile Strength(MPa)	450 min.
water absorbency	NO	Length:	3mm,6mm,12mm, 19mm

APPLICATIONS:

1. Functions:

Resist to shrink & crack
Increase seepage resistance
Increase friction resistance
Increase freezing & thawing resistance
Improve tendons protection Replace steel net (using in plastering)
Prevent mortar split and crackle expansion
Increase impact resistance and peeling resistance

2. Features:

A). No agglomeration and easily spread around in mortar or concrete.

Guarantee the property of crack resistance effectively

B). Apply conveniently. No need to change the proportion of mortar,

and just put the fibers into the mortar mixture and stir for a moment after adding water.

C). Has fine economic property. The equivalent dia. of polypropylene monofilament is only φ 25um, so the ratio of dia. And surface is high and on the basis of crack resistance,

it can reduce the amount (0.6kg/m 3 ) and cut down the cost effectively.

D). Be better to plaster. Because a great number of thin fibers spread into mortar evenly, so the plastering is much easier and this can improve the binding strength between surface and base.

E). The fiber has stable chemical property, strong acid &alkali resistance, and can be used in any engineering projects.

3. Applications:

A). suit for the waterproof layer, floor, inner & outer wall of industrial and civil construction.

B). Increase cracking resistance on the surface of industrial workshop, warehouse.
C). Increase cracking & seepage resistance of the ground in natatorium, swimming pool,pond and ditch.
D). Suit for any mortar projects and common concrete projects
E). Highway, bridge and other roads.

4. Applying Instruction:

A). Dosage: for resist the common cracks on surfaces, 0.9kg/m3 fibers to cement mortar
is enough, for increasing reinforce and seepage resist application 1.8kg/m3 is enough.

B). Stirring requirement: The proportion of cement, sand and aggregate is no need to be changed. Put cement, aggregate, additive and fiber together, then stir after adding enough water and time for stirring can be prolonged for 2~3 minutes in order to make the compound mix completely.

Also it can be mixed with cement and other aggregates in advance, stirring by adding water at work site before construction.

PACKING:
normal packing is 0.6kg, 0.9kg or 1.0kg a PE bag,
18kgs / plastic woven bag.

Forward

Related products