China Manufacturer Antenna Csx607A GPS Glonass Galileo with L-Band Gnss Antenna

Min.Order: 1
Product origin: Tianjin, China
Infringement complaint: complaintComplaint
US$ 200 ~ 500

Description
Product Description

China manufacturer antenna CSX607A GPS GLONASS Galileo with L-band gnss antenna

Survey Antenna CSX607A

 

CSX607A receives BDS B1/B2/B3,GPS L1/L2/L5, GLONASS L1/L2/L3,Galileo E1/E2/E5a/E5b and L-band frequencies. It has consistent performance (gain, axial ratio) across the full bandwidth of the antenna.

 

This antenna has high gain and wide beam width to ensure the signal receiving performance of satellite at low elevation angle. The phase center of this antenna remains constant as the azimuth and elevation angle of the satellites change. Signal reception is unaffected by the rotation of the antenna or satellite elevation, so placement and installation of the antenna can be completed with ease. It has become the preferred product for land survey, marine survey, channel survey, seismic monitoring, bridge survey, container operation, etc.

 

Key Features

 

1. Support BDS B1/B2/B3,GPS L1/L2/L5,Galileo E1/E2/E5a/E5b, GLONASS L1/L2/L3, SBAS and L-band frequencies.

2. Multi-path rejection board inside caneliminate the multi-path influence to measurement error.

3. Adopt multi feed design to ensure thesuperposition of phase center and geometrical center, and minimize the influence to measurement error.

4. Water & dust-proof design ensuresabsolute seal of kernel parts, capable for long time outdoor operation.

5. Very low noise figure.

6. Lightning proof circuit inside can protect the LNA from being damaged by surgeimmunity.

Product Parameters
Antenna Specification
Frequency RangeGPS L1/L2/L5
GLONASS L1/L2/L3
BDS B1/B2/B3
Galileo E1/E2/E5ab
SBAS
Impedance50ohm
PolarizationRHCP
Axial Ratio≤3dB
Azimuth Coverage360°
Output VSWR≤2.0
Peak Gain5.5dBi
Phase Center Error±2mm
LNA Specification
LNA Gain40±2dB
Noise Figure≤2.0dB
Output VSWR≤2.0
Operation Voltage3.3~12VDC
Operation Current≤45mA
Group Delay≤5ns
Mechanical Specification
Dimensionφ 173.4*62.6mm
ConnectorTNC Female
Weight456g
Environment Specification
Storage Temp-55ºC~+85ºC
Operating Temp -45ºC~+85ºC
Humidity 95% No-condensing
Detailed Photos
 

Packaging & Shipping

After Sales Service

 

Within the 12 months, if there is any fault caused by non-artificial reason, which can be repaired by the customer themselves, we
can offer the spare parts to the customer free of charge. If there is any problem which cannot be repaired by the customer
themselves, the customer can resent the products to our factory for repairing free of charge, and the freight charge would be
shared by the customer and our company two sides.Under the circumstances out of the warranty period, if there is any problem, we
can repair free of charge for the customers, we just charge for the spare parts at the cost itself, and the freight charge would
be bear by the customers.
If there is any problem caused by human reason within the first year, the service would be the same as the service out of the
warranty period.
Company Profile
Tianjin Unique Technology Co., Ltd. is a high-tech enterprise that specializes in researching and manufacturing high accuracy GNSS
products and surveying equiupments. Our products refer to many fields including GIS (geographic information system), Land Survey,
Machine Control, SI (system integration), Agriculture, etc. Our aim is to provide the high-quality products and offer the best
solutions and services for our customers worldwide.

Our Services & Strength

1.Any inquiries will be replied within 12 hours.
2.All our products have one year warranty, And we sure the products will be free from maintenance within warranty period.
3.All products will have been strictly quality checked in factory before sending out.
FAQ

1.What are your prices?    
Our prices are subject to change depending on supply and other market factors. We will send you an updated price list after your company contact us for further information.
2.Do you have a minimum order quantity?    
Yes, we require all international orders to have an ongoing minimum order quantity. If you are looking to resell but in much smaller quantities, we recommend you check out our website
3.Can you supply the relevant documentation?    
Yes, we can provide most documentation including Certificates of Analysis / Conformance; Insurance; Origin, and other export documents where required.
4.What is the average lead time?    
For samples, the lead time is about 7 days. For mass production, the lead time is 20-30 days after receiving the deposit payment. The lead times become effective when (1) we have received your deposit, and (2) we have your final approval for your products. If our lead times do not work with your deadline, please go over your requirements with your sale. In all cases we will try to accommodate your needs. In most cases we are able to do so.
5.What kinds of payment methods do you accept?   
You can make the payment to our bank account, T/T, credit card, Western Union.
6.What is the product warranty?   
We warranty our materials and workmanship. Our commitment is to your satisfaction with our products. In warranty or not, it is the culture of our company to address and resolve all customer issues to everyone's satisfaction
7.Do you guarantee safe and secure delivery of products?   
Yes, we always use high quality export packaging. We also use specialized hazard packing for dangerous goods and validated cold storage shippers for temperature sensitive items. Specialist packaging and non-standard packing requirements may incur an additional charge.
8.How about the shipping fees?   
We usually use delivery express, such as DHL, FedEx, UPS, etc.

Scroll to Top