Product Specification
. Input / Output Volt.: 5V
. Input Current : 2A
. Led : 6pcs RGB,colorful
. Power: 1.2W
. Lumen : 100lm
. Remote distance : 5-8 meter
. Product size: 103x90x30mm
.USB cable : 1.5 meter
.With remoter
.Touch switch
Instruction For using
.The lamp and the lamp are connected by a connecting plate. Pay attention to the consistency between the surface printed with the word top and the light-emitting surface.
. Connect the lamp corner with fasteners.
. After matching the desired pattern, connect the USB cable to the USB port of the lamp closest to the power supply, connect the other end of the USB cable to the adapter with the output voltage of 5v2a (not included), and plug the adapter in.
. Unplug the insulating piece of the remote control and press the on key to the light to see if all the lights are on. If the light is not on, please point the remote control at the light that is not on and press the on key. If it is still not on, please check whether the connecting plate is connected correctly.
. Unplug the power supply and place the lamp on the plane with the bottom facing up. Apply double-sided tape to the bottom circle of the lamp.
. Then wipe the wall where the lamp is to be placed, pick up the combined lamp and press the side with double-sided adhesive tape on the wall.
. Connect the power supply and use the remote control to choose the color and flashing mode you like. Touch the center of each lamp with your hand to set the color of a single lamp.
. The spare USB port on the lamp can be used to power or charge other devices.