Complaint
| 4 axis rotary servo AB glue dispenser | ||
| Model | AB glue dispensing robot dispenser | |
| Allowable Delivery(mm) | 300/300/100(customized) | |
| Programming Mode | Imported teaching programming or graphics | |
| Glue ratio | 1:1, 2:1, 4:1, 5:1, 10:1 double liquid structural adhesive | |
| Dispensing method | Mechanical valve + Y needle | |
| Cooling method | Vortex tube cooling | |
| Capacity of glue Barrel | 1L/5L/10L/customized | |
| Minimum discharge | 0.01ml | |
| Action frequency | 5times/SEC. | |
| Max. Payload | Y/X axle load | 10kg |
| Z axle load | 5kg | |
| Axial dynamic speed X/Y/Z(mm) | 0-600mm/sec | |
| Resolving power | 0.01mm/Axis | |
| Repositioning accuracy(mm) | Screw rod transmission | 0.01-0.02 |
| Synchronous belt transmission | 0.02-0.04 | |
| Program record mode | At least 100 groups, 5000 Points each group | |
| Display mode | LCD teaching box | |
| Motor system | Japan Shinano Kemshi high precision micro stepping motor | |
| Transmission mode | Leading rail | Taiwan Hiwin linear leading rail |
| Screw rod | Taiwan Hiwin bar | |
| Belt | Italy Elatech synchronous belt | |
| X/Y/Z axis synchronous belt for standard configuration, Z axis screw rod is optional, X/Y/Z axis screw rod for customization | ||
| Motion tween function | 3 axis(Three dimensional space, any route is allowable) | |
| Input power | Full voltage AC110V-220V | |
| External control interface | RS232 | |
| Axis number controlled by motor | 3axis | |
| Allowable Delivery(mm) | X axis | 300(customized) |
| Y axis | 300(customized) | |
| Z axis | 100(customized) | |
| R axis | (customized) | |
| Size | 540*580*650 | |
| Body weight | 58kg | |
| Warranty | 12 monthes | |
| After-sales service | Video technical support, Online support | |
| Payment Term | T/T 80% deposit and balance paid off before shipment | |
| The distinguishing features: 1)Y-type needle controlled glue valve can break glue simply, not drawn. 2)There is no phenomenon such as big heads at both ends with uneven joint. 3)It is compatible with 10:1, 1:1, 2:1 AB glue mixture. 4)It has a continuous dispensing function for irregular curves like arbitrary Point, Line, Surface, Arc etc.. 5)It provides a variety of controllers for glue needle, pin, glue valve according to different requirements. 6)Its own refrigeration function effectively delays the solidifying time of AB glue. | ||
