Complaint
The solenoid valve of 1032-2 series is a family of diaphragm valve with 2.5mm orifice diameter, controlling the switch of fluid flow path. This series solenoid valve is a high performance, low cost and maintenance free diaphragm valve with multiple model options, which are suitable for different reagents under different working condition.The life cycle of valves can be operated more than 2 million
| Structure | Direct acting diaphragm solenoid valve |
| Type | 2-way N.C. |
| No.of Ports | 2 |
| Orifice Diameter | 2.5mm |
| Coefficient Of Variation (CV) | 0.05 |
| Mediums | Water, air, diluent, cleaning fluid, weak acid, weak alkali. (The material will be decided based on mediums. If strong acid and base corrosive request, please contact keyto.) |
| Operating Temperature | 0ºC~60ºC |
| Operating Pressure(in - out) | -70kpa~0.2mpa |
| Leakage Rate | 0 |
| Response Time | <50ms |
| Dead Volume | 0 |
| Voltage Tolerance | DC12V,24V |
| Fluctuation Of Voltage | From-10% to+10% |
| Power Consumption | 3.5W |
| Type of coil insulation | B |
| Wight | 80g |
| Recommended Connector | Inner diameter of the hose should be 2.5mm ~3.5mm (shore hardness around:55~ 75). It need truss a wire to increase the sealing reliability cause the rubber tube is too soft. |
Remark: please contact us for more details
Orifice diameter: 2.5mm; low resistance;
Large flow: Cv≥0.05; flow≥8.5mL/s (pressure drop 50KPa, 25ºC, pure water)
Small dead volume: zero dead volume inside the solenoid valve.
Multiple option for wetted material:
1. Body Material:PPS POM PTFE etc.
2. Seal Material:EPDM FFKM FKM etc.
Long lifetime, high performance.
