Description
Motor Stator Winding Lacing Machine with Servo Control
This coil lacing machine can work as a stand-alone machine or integrated in a production line.
(1) Application
This type of machine is suitable for AC motor, induction motor stators, and 3 phase motor , fan motor, compression motor ,air conditioner motor, washing machine motor, generator motor and pump motor.
(2) Specification
Stack length | 15~120mm |
Stator ID | 25~100mm |
Stator OD | Max 160mm |
Coil height | Max 40mm |
Lacing mode | Slot by slot/ interval slot/ fancy lacing |
Lacing speed | 0.45s/slot |
Power | 4KW |
Power supply | 380V 50/60HZ |
Weight | 800KG |
Dimension | 1500x650x1700mm |
(3) Feature
Double side lacing
High quality level of the lacing process
Manual loading and unloading
Several lacing mode applicable
Can be customized accordingly
Parameter of different models can be edited, modified and displayed
The entire working cycle is fully automatic excluding manual loading and unloading
Integrable in a production line
No need to change tooling for different stack length, only mechanical adjustment required
Different lacing modes available, slot-by-slot lacing, slot-skipping lacing or fancy lacing
Stator lacing is the process of tightly securing the field coil ends of an electric motor stator with a stitched cord,motor stator braiding. Lacing is typically used on long-life-expectancy or high-efficiency motors such as some induction motor where the cost of failure is high. Generally, low-cost "throwaway" motors are not laced. There are several reasons for lacing motor stators:
• The lacing holds the thermal protector, coil ends, and leads in the proper position.
• Lacing extends a motor's life by preventing the wires in the coils from vibrating and causing fatigue failure during operation.
Lacing may be used to hold the coils in position and provide loops to hang the stator from a conveyor during the dip-and-bake varnishing operation.
The most obvious reason for lacing a stator automatically by machine is increased productivity. The lacing machine can lace more stators per hour than a person doing it manually, and usually at a substantially lower cost. The lacing machine also provides improved lacing quality and consistency over long time periods.
Another important advantage of machine lacing is the avoidance of carpal tunnel syndrome, a debilitating hand and wrist injury caused by repetitive strenuous handwork.
Several different styles of lacing machines are generally available to the motor manufacturer. The simplest machines lace one end of the stator at a time, and are referred to as single-end lacers. Others have two needles and lace both ends of the stator at the same time, and are known as double-end lacers.
Lacing machines may be constructed so the stator is vertical and the lacing needle is horizontal, or with the stator horizontal and the lacing needle vertical.
Most lacing machines index the stator about its axis during the lacing cycle, but a few machines have been designed to clamp the stator and rotate a lacing head with the needle around the stator.
Some machines use a closed needle with an eye, like a sewing machine, but the vast majority use an open needle, similar to a crochet hook, to form the stitch. In general, the open-hook needle produces a "diamond" stitch, with diagonal coverage of the coils, whereas the closed-eye needle produces more of a radial stitch.
There is also a wide variety of lacing cords (insulation thread) available. These cords may be made from fibers such as cotton, polyester, nylon, or other synthetics, and may be formed