Complaint
Built for Efficiency
World-class Dongfeng engine with high power and low fuel consumption.
Scraping knife has 360 degree rotation, 90 degree right/left lateral adjustment, and 40-70 degree penetration for leveling, trenching, ditching, wall scraping and more.
LiuGong designed suction cooling system has better cooling, lower wind sensitivity and is less impacted by dirt than normal systems.
Meeting EU stage II/EPA tier 2 emission standards.
Easy to Maintain
Hydraulic pipes on both sides of frame for easy maintenance.
Easy engine access and access to main maintenance points
Reliability
Power cuts off if hand brake not removed, this prevents accidental damage.
Parts, service and attachments you can count on.
World-class suppliers of key components.
Operator Comfort and Safety
Dustproof, sound reducing, shock absorbing and anti-UV cabin.
Comfortable adjustable suspension seating.
Air Conditioning optional.
Full range of visibility.
| Engine | DCEC 6CTAA8.3-C215 | |
| Rated Power | (kW) | 160(215)@2200 |
| Blade Width | mm(inches) | 3960(156) |
| Maximum Speed | km/h (mph) | 40.3 (25) |
| Draw Bar Pull | (kN) | 86 |
| Operating Weight | kg(Lb) | 16500(36376) |
| ENGINE | ||
| Tier | II | |
| Make | US brand | |
| Gross Power | kW(Hp)@rpm | 160(215)@2200 |
| Net Power | kW(Hp)@rpm | 144(195)@2200 |
| Peak Torque | 908N.m/1500rpm | |
| Aspiration | turbo air-to-air aftercooled | |
| TRANSMISSION | ||
| Transmission Type | power shift | |
| Transmission Configuration | 6f/3r | |
| Torque Converter | three-member single turbine | |
| Maximum Travel Speed, fwd | (km/h) | 42 (25.8) |
| Maximum Travel Speed, rev | (km/h) | 25.6 (15.9) |
| AXLES | ||
| Front Axle Make | LiuGong Weld axle | |
| Rear Axle Make | Meritor | |
| Differential Type | No-spin limited slip standard | |
| Final Drive Type | chain drive | |
| Axle Oscillation | ±15° | |
| Front Axle Type | all welded steel frame | |
| Front Axle, Wheel Lean Angle | ±17° |
