Description
The SC1401 provides the PROFIBUS-DP slave expansion function by using the PCS1200 PROFIBUS-DP slave to connect to the PROFIBUS-DP network with this module.
Technical SpecificationsSupport Codesys v3.5 SP13 Communication parameters | Module consumption |
Number of Channels | 1 | Extension Bus power supply (5VDC) | 120mA |
Type of interface | Terminal connection A+,B- | Extension Bus power supply (24VDC) | 20mA |
Communication protocal | PROFIBUS-DP (Slave) | Dimensions and Mounting |
Station adress | 1~125() | Dimensions | 72mm(L)×80mm(W)×63mm(H) |
Baud rate | 9.6/19.2/45.45/93.75/187.5/500kb 1/1.5/3/6/12Mbps, | Weight | 160g |
Data transfer area size | Input area 64 bytes | Way to install | 35mm DIN |
Output area 64 bytes | Panel mounting type |
Maximum number of sites per segment | 32 | Work Environment |
Maximum number of sites per network | 126 | Operating temperature | 0~+55ºC |
Isolation of pressure | 500VDC | Storage temperature | -40~+70ºC |
Relative humnidity | 5%~95%, |
Main interface and terminal definition1.Module terminals: A+ for the positive incoming and outgoing terminals of the DP slave communication, B- for the negative incoming and outgoing terminals of the DP slave communication, "*" indicates that there is no actual physical connection on this channel.
2.Indicator light: COM Indicator light means that communication data is being exchanged between SC1401 and DP master, off means that DP is not exchanging communication data, RUN is used to display the module operation.3.DP Dipswitch: An 8-bit dipswitch is used to set the address of the DP slave.DP slave wiring and address setting
1.PROFIBUS-DP communication wiring: SC1401 is connected to the master via terminals A+ and B-.
2.The 8-digit DIP switch is used to set the DP slave addresses. The switch state of each dial code refers to a different binary value (ON means 1, OFF means 0), the 8-digit binary number consisting of 1~8 digits of dial code corresponds to the decimal value which is the DP slave address of SC1401.The address settings are shown in the figure below.
Note: The factory default setting of the dip switches are all set to "OFF" state, that is, all are "0".Access to master GSD filesUnder the installation directory\chitic\PCS1200\PCBASEDIO.About CHINTFounded in 1984, the Chint Group provides safe, reliable and stable industrial electrical equipment and solutions for energy efficient management systems. With 30 years of development it has grown to be Asia' s largest low*voltage electrical product supplier and is the leading brand of the whole industry chain in industrial electric in Asia. With three R&D centers located in Europe, North America and China, there are also branches in over 20 countries and more than 30.000 employees in the world. CHINT provides reliable products, system solutions and services to more than 100 countries worldwide.
•
3 Global Research Centers: Europe, North America, Asia Pacific
•
6 International Marketing & Sales Area: Asia Pacific, Middle East and Africa, Europe, Latin America, North America, China
•
9 Manufacturing Bases: China (Wenzhou, Shanghai, Hangzhou, Jiaxing, Xianyang, Jiuquan), Thailand, Egypt, Germany
•
22 Logistics Centers
14 International Subsidiaries
17 Marketing Offices in China
2300 Sales Companies
About ChiticChrtic Control Engineering Co.. Ltd. is a subsidiary company of Chint, and a leading provider of automation & control technologies and applications in China that helps the industry customers to improve operating safety, reliability and efficiency. Chitic has series of products including PCS1800 DCS, TDCS9200 DCS and CTS700 DCS, information platform for water company, control system for high speed rapier loom, drive system of switched reluctance motor, solar energy monitoring system, computing cloud center for new energy; etc. Chitic control system won 2006 National Science and Technology Progress Awards of China, CTS700 DCS won the award of 2010 Innovative Product of China. Chitic headquarter is located at the beautiful city of Hangzhou, two hours drive from Shanghai. Chitic has its own science & technology park, Chitic Park, which covers about six thousand square meters.
Our Business Sector
Typical Reference