Complaint
This series machine is suitable for both hook and riser type commutator to do welding. 40KVA series suitable for round wire within 3.2mm-4mm( AWG8 -AWG6) while,80KVA for flat wire within 2.8mm-7.8mm( AWG9 -AWG1). It can weld 23 slots armature within 50 seconds.
(1) Features
Suitable for armature with both flat or round wire
Suitable for both hook or riser type commutator
Fully automatic welding cycle after loading of armature
Water cooling system prevents overheating
Memory storage of welding and commutator's parameters
Can be customized accordingly
High quality level of the commutator welding process
| Item | WIND-DNZ-40 |
| Fusing Rated power (KVA) | 40 |
| Power supply (3phase) | 380V, 50Hz |
| Max. starting current | 6A |
| Max.short circuit current | 9KV |
| Rated load duration | 20% |
| Secondary voltage | 4.8V |
| Welding cylinder dimension | f 100*50 |
| Electrode size | f10*100 |
| Fusing machine dimension | 1200*720*1720 |
(3)Application
This machine is suitable for starter rotors, automotive car motor. Starter motor armature with round wire, flat wire
(4)Advantages of welding machine
Fusing Quality Assured |
Motor manufacturer use it for 8 years only replace parts two times, one time is valve replace, the other time is relay replacement
|
Wide Application |
Copper wire wide adaption below 3.2mm to 2.8*7.8mm
|
Easy to Operate |
Easy for the operator to set with Miyachi controller CT110 which is widely used in fusing machine |
(5)Welding machine series parameter
| Fusing Power supply and parameter | WIND-DNZ-40 | WIND-DNZ-60 | WIND-DNZ-80 |
| Fusing Rated power (KVA) | 40 | 60 | 80 |
| Power supply (3phase) | 380V, 50Hz | 380V,50Hz | 380V,50Hz |
| Max. starting current | 6A | 7A | 8A |
| Max.short circuit current | 9KV | 11KV | 13KV |
| Rated load duration | 20% | 20% | 20% |
| Secondary voltage | 4.8V | 5V | 5.2V |
| Welding cylinder dimension | f 100*50 | f125*50 | f125*50 |
| Electrode size | f10*100 | f10*100 | f10*100 |
| Fusing machine dimension | 1200*720*1720 | 1200*720*1720 | 1200*720*1720mm |
(6)Welding cycle time & Feature
Commutator spot welding WIND-DNZ machine fuse 23 slots armature within 50 seconds,
