Adjustable Single Phase Split Core CT AC 200mA Current Sensor Electric Vehicle

Min.Order: 1
Product origin: Shanghai, China
Infringement complaint: complaintComplaint
US$ 14.25 ~ 19.25

Description

This non-invasive current sensor (also known as a "split core current transformer") can be clamped around the supply line
of an electrical load to tell you how much current is passing through it. It does this by acting as an inductor and responding
to the magnetic field around a current-carrying conductor. By reading the amount of current being produced by the coil,
you can calculate how much current is passing through the conductor.

This particular current sensor will measure a load up to 30 Amps which makes it great for building your own energy monitor
to keep your power usage down, or even building an over-current protection device for an AC load. This sensor does not
have a load resistor built in, so in most cases it will be necessary to place a resistor across the output to convert the coil's
induced current to a very small measurable voltage.

Specification DataMeasuring Current Range100A
Accuracy ClassClass 1
Temperature Accuracy2ºC
Frequency50-60Hz
Wiring Diameter≤φ12mm
Operation Temperature-20~+85ºC
Withstand Voltage>3000VAC
Response Time200mS
CommunicationM-BUS Communication

Cautions of Smart Sensor:
1.Current value- Please specify your measurement range as per your application, for example if you are going to
use it for detecting and sensing mA level or high  current range such as 500A/600A shall be first factor.
2.AC,DC,or both AC&DC shall be the second factor. Now current sensor on the market usually are AC or DC type.
But if you need both AC& DC you may need to use IVY brand- AC DC leakage sensor.
3.Parameters-Please confirm what kind of parameters shall be measured or detected. For example our smart sensor
with shunt can readout current, voltage,kWh, kVar, Cos
φ, Hz, THF, current cycle, starting waveform.
4.Communication-RS485,M-bus, UART serial port are optional, if you have more requirements we can also develop for you.
5.Installation Method, after making above decision you may also need to confirm the output terminal type, for example we have
shunt / terminal / pillar / pins/ cable etc.
6.
As there are many models of smart electrical sensor, plz refer to the detailed specification and use it as per the instruction.
Scroll to Top