3003 H24 Diamond Aluminium Checker Tread Alloy Sheet for Floor

3003 H24 Diamond Aluminium Checker Tread Alloy Sheet for Floor
 Aluminum Diamond Sheet for Anti-Slip Floor t is defined by its unique pattern, with small, individual blocks of five parallel bars oriented perpendicularly to their neighboring blocks.
OurAluminum Tread Plate Diamond alloy sheet  products come in a variety of lengths and thickness's. They are available in both Metric and Imperial to suit your requirements.
A very common mistake made when ordering Aluminium Tread Plates is over the thickness of the product, O/P means On Plane not over pattern, as an example 4.5mm O/P Tread Plate will give you an over all thickness of approximately 6mm including the pattern.

1. Alloy: 1060, 1100, 3003, 3105, 5052, 5754, 6061
2. Temper: H14, H16, H18, H24, H22, H32
3. Thickness: 1-6mm
4. Width: 500-3500mm
5. Productivity: 5000 Metric ton per month
6. Packing: Wooden pallets, Blank waterproof paper, plasitic kraft
7. Delivery Date: 15-20 days




 

Sizes range for  5 Bars Alloy Aluminium Tread Sheet Plate

Alloy	Temper	Size range (mm)
		Thickness	Width	Length
1050A, 1200	F	1.5-2.4	800-1500	1000-6000
		2.0-6.0	800-1500	1000-8000
	F, H114	1.5-2.0	900-1600	1000-4000
		2.0-8.0	900-2000	1000-9000
5251, 5052, 5754	H114, H224	1.5-2.4	800-1500	1000-6000
		2.4-6.0	800-1500	1000-8000
	F, H114,H224	1.5-2.0	900-1600	700-4000
		2.0-7.0	900-2000	1000-9000
	F, H114	7.0-8.0	900-2000	1000-9000
5154A	F, H114	2.0-6.0	900-1600	1000-9000
5086,5083	F, H114, H224, H116	2.0-6.0	900-1600	1000-9000
6061, 6082	F, 0, T4, T6	1.5-2.0	900-1250	700-4000
		2.0-3.5	900-1600	1000-4000
	F, 0	2.0-3.5	1600-2000	1000-4000
	F, 0, T4, T6	3.5-4.83	900-1250	1000-4000
		3.5-4.83	1250-2000	1000-4000
	F, 0	4.83-6.35	900-2000	1000-4000
3003	H224	1.5-2.0	800-1524	1000-4000
		2.0-2.4	800-1524	1000-6000
		2.4-6.35	800-1524	1000-8000

Sizes range for aluminium tread coil

 

Alloy	Temper	Size range (mm)
		Thickness	Width	Diameter
				Inside	Outside
5251, 5052, 5754	H114, H224	1.5-3.0	800-1500	500, 610	Max.1600
		3.0-6.0	800-1500	750	Max.1600
	F, H114, H224	3.0-7.0	1250-2000	600	Max.1800
	F, H114	7.0-8.0	1250-2000	600	Max.1800
5154A, 5086, 5083	F, H114	3.0-6.0	1250-2000	600	Max.1800
1050A, 1200, 3003	F, H114	3.0-8.0	1250-2000	600	Max.1800
3003	H224	1.42-3.1	800-1524	500, 610	Max.1600

Chemical Properties(WT.%)

Alloy	Si	Fe	Cu	Mn	Mg	Cr	Zn	Ti	impurities	Al	note
1050	<0.25	<0.40	<0.05	<0.05	<0.05		<0.05	<0.03	Other, each 0.03	>99.5	V<0.05
1060	<0.25	<0.35	<0.05	<0.03	<0.03		<0.05	<0.03	Other, each 0.03	>99.6	V<0.05
1070	<0.20	<0.25	<0.04	0.03	0.03		0.04	0.03	Other, each 0.03	>99.7	V<0.05
1100	Si +Fe <0.95		0.05-0.20	<0.05			<0.10		Other, each 0.03	>99.00	V<0.05
3003=АМц	<0.6	<0.7	0.05-0.20	1.0-1.5			<0.10		Other,each 0.05, total 0.15
3004	<0.30	<0.7	<0.25	1.0-1.5	0.8-1.3		<0.25		Other,each 0.05, total 0.15
3105	<0.6	<0.7	<0.30	0.30-0.8	0.20-0.8	<0.20	<0.4	<0.10	Other,each 0.05, total 0.15
5052=АМг2.5	<0.25	<0.40	<0.10	<0.10	2.2-2.8	0.15-0.35	<0.10		Other,each 0.05, total 0.15
5083=АМг4.5	<0.40	<0.40	<0.10	0.40-1.0	4.0-4.9	0.05-0.25	<0.25	<0.15	Other,each 0.05, total 0.15
6061=АД33

 

           1, the Aluminum Tread Plate for paper or film, to ensure that the surface of aluminum plate without scratches;
           2, plastic or kraft paper wrapped to moisture and rain, to ensure that aluminum in the transport process clean and free of dirt;
           3, the installation of wood and steel reinforcement, to avoid collision in the transport process to ensure that the Aluminum Tread Plate geometry unchanged;
          4, export products, are marked with a fumigation of wooden boxes and brackets for packaging;
          5, according to the customer's other packaging requirements for packaging;

About haomei

Haomei Aluminum is a professional aluminum diamond plate manufacturer, mainly produces series-1, series-3, series-5, series-6 and series-8 pure aluminium and aluminium alloy plate/sheet/coil/strip/circle, etc, such as hot -rolled thick plate for molding, aluminium sheet for metal cap, aluminium circle/disc for cookware, aluminium strip for transformers,aluminium diamond plate metal/aluminum black diamond plate sheets, aluminium diamond plate sheets 4x8 aluminium alloy plate, aluminium drilling entry for PCB, aluminium household foil, and so on. We have been exporting to US, UK, Italy, Germany, Netherlands, Bulgaria, Brazil, Chile, Thailand, Vietnam, Ghana, etc.