Description
Technical SpecificationsSupport Codesys v3.5 SP13| Input Channel | Module consumption |
| Number of Channels | 4 | Extension Bus power supply
(5VDC) |
100mA |
| Input type | J, K, T, N, E, R, S, B type thermocouple, -80~80mV | Extension Bus power supply
(24VDC) |
40mA |
| Accuracy of the input | 0.2%FS@25°C (voltage) (FS indicates full scale, @25°C indicates at 25°C) | Dimensions and Mounting |
| Temperature resolution | 0.5ºC | Dimensions | 72mm(L)×80mm(W)×63mm(H) |
| Sampling refresh time |
20ms(all channel) | Weight | 160g |
Differential mode rejection ratia
|
70dB@50HZ
| Way to install | 35mm DIN rail |
| Panel mounting type |
| Temperature drift | ±50ppm/ºC | Work Environment |
| Cold End Error | ±2ºC | Operating temperature | 0~+55ºC |
| Cold End Compensation | Support (to be corrected by software, taking into account the temperature difference between the module and the cabinet). | Storage temperature | -40~+70ºC |
| Broken wire detection | Support | Relative humnidity | 5%~95%, |
Main interface and terminal definition
1.Module terminals: A+ and A- are a group of thermocouple input terminals, the two ends of the thermocouple are connected to A+ and A- respectively, the rest of the groups are the same as above, "*" means there is no actual physical connection of this channel.
2.Indicator:Channel indicator light means the corresponding channel is working normally, off means the module is not powered on or the corresponding channel is working abnormally, RUN and ERR are used to display the module operation and fault conditions respectively.
The corresponding relation of input signal A/D is as follows:| Input type | Measuring range(ºC) | Range of values corresponding to the range |
| J | -210~1200 | -2100~12000 |
| K | -270~1370 | -2700~13700 |
| E | -270~1000 | -2700~10000 |
| N | -270~1300 | -2700~13000 |
| T | -270~400 | -2700~4000 |
| R | -50~1768 | -500~17680 |
| S | -50~1768 | -500~17680 |
| B | 0~1820 | 0~18200 |
| -80~80mV | - | -8000~8000 |
Note: PCS1200 programmable logic controller terminals are all pluggable. Description of terminal tag definition| Terminal | Terminal instructions | Terminal | Terminal instructions |
Unmarked
|
No wiring required
| A+ | Thermocouple Inputs + |
| A- | Thermocouple Inputs - |
| * | Undefined |
| B+ | Thermocouple Inputs + |
| B- | Thermocouple Inputs - |
| * | Undefined |
| C+ | Thermocouple Inputs + |
| C- | Thermocouple Inputs - |
| * | Undefined |
| D+ | Thermocouple Inputs + |
| D- | Thermocouple Inputs - |
| * | Undefined |
| Terminal | Terminal instructions | Terminal | Terminal instructions |
| E+ | Thermistor input + | A+ | Thermistor input + |
| E- | Thermistor inpuit - | A- | Thermistor inpuit - |
| * | Undefined | * | Undefined |
| F+ | Thermistor input + | B+ | Thermistor input + |
| F- | Thermistor inpuit - | B- | Thermistor inpuit - |
| * | Undefined | * | Undefined |
| G+ | Thermistor input + | C+ | Thermistor input + |
| G- | Thermistor inpuit - | C- | Thermistor inpuit - |
| * | Undefined | * | Undefined |
| H+ | Thermistor input + | D+ | Thermistor input + |
| H- | Thermistor inpuit - | D- | Thermistor inpuit - |
| * | Undefined | * | Undefined |
Input channel connection mode
About CHINT
Founded in 1984, the Chint Group provides safe, reliable and stable industrial electrical equipment and solutions for energy efficient management systems. With 30 years of development it has grown to be Asia' s largest low*voltage electrical product supplier and is the leading brand of the whole industry chain in industrial electric in Asia. With three R&D centers located in Europe, North America and China, there are also branches in over 20 countries and more than 30.000 employees in the world. CHINT provides reliable products, system solutions and services to more than 100 countries worldwide.
• 3 Global Research Centers: Europe, North America, Asia Pacific
• 6 International Marketing & Sales Area: Asia Pacific, Middle East and Africa, Europe, Latin America, North America, China
• 9 Manufacturing Bases: China (Wenzhou, Shanghai, Hangzhou, Jiaxing, Xianyang, Jiuquan), Thailand, Egypt, Germany
• 22 Logistics Centers 14 International Subsidiaries 17 Marketing Offices in China 2300 Sales Companies
About Chitic
Chrtic Control Engineering Co.. Ltd. is a subsidiary company of Chint, and a leading provider of automation & control technologies and applications in China that helps the industry customers to improve operating safety, reliability and efficiency. Chitic has series of products including PCS1800 DCS, TDCS9200 DCS and CTS700 DCS, information platform for water company, control system for high speed rapier loom, drive system of switched reluctance motor, solar energy monitoring system, computing cloud center for new energy; etc. Chitic control system won 2006 National Science and Technology Progress Awards of China, CTS700 DCS won the award of 2010 Innovative Product of China. Chitic headquarter is located at the beautiful city of Hangzhou, two hours drive from Shanghai. Chitic has its own science & technology park, Chitic Park, which covers about six thousand square meters.
Our Business Sector
Typical Reference
Complaint
