Motor size | Φ67*30.1mm | Centrifugal heat dissipation | YES |
Stator | Imported silicon steel sheet, rust prevention, resistant to high temperature of 180ºC. | Dynamic balance standard of rotor | ≤5Mg |
Configuration | 18N22P | Dynamic balance standard of motor | ≤10Mg |
Shaft diameter | IN:6mm | Protection grade | / |
Bearing | Imported 696ZZ bearing | Accessories | Screw (M3*10mm)*2 |
Magnet grade | resistant to high temperature of 180ºC | Cooper adapter (6*4*2mm)*1 | |
Cable spec. | Lead wire 60mm | Screw (M4*12mm)*4 | |
Enameled wire insulation | resistant to high temperature of 220ºC | Cover Φ20 *1 | |
Coil insulation | withstand voltage 500V | / | |
KV | 320KV | Rated volts (Li-po) | 6S |
Idle current(22V) | 1.4A | ESC | AIR 40A,F45A FLAME 60A |
Peak current(A)180S | 39A | Prop | 21~22'' |
Max.power(W)180S | 936W | Motor weight | 180g |
Internal resistance | 50mΩ | Packing weight | 364g |
KV | 160KV | Rated volts (Li-po) | 6-12S |
Idle current(22V) | 0.5A | ESC | FLAME 60A |
Peak current(A)180S | 18A | Prop | 21~22'' |
Max.power(W)180S | 864W | N.W. | 172g |
Internal resistance | 227mΩ | G.W. | 356g |
Recommended configuration | |||
Motor | MN6007 KV160 | Motor | MN6007 KV320 |
Prop | 22'' | Prop | 22'' |
Cells of battery (Lipo) | 12S | Cells of battery (Lipo) | 6S |
Uniaxial thrust | ≤2kg | Uniaxial thrust | ≤2kg |