Daily Capacity 100 Cbm AAC Block Plant Mini AAC Block Plant Automatic Cement Hollow Concrete Block Forming Machine AAC Manufactured in China

Internal and external lightweight  aac bricks  making machine production line   aac block  making machine production line and AAC panel equipment aac blocks plant 

daily capacity 100 cbm of  Small AAC block plant Mini aac block plant Automatic Aac Block Machine 

Brief introduction

Areated concrete brick (light brick ) is the light and porous buidling material. It has light weight keeping temperature cant burn and other advantages.it can be made into many kinds of bricks(for example:600×200×100,80×80×180,240×115×53,600×200×125),they could be used industry building and common building.they are more and more popular in the world.in the future,they will replace the Clay brick completely.

AAC block production line is produced out of a mix of cement, lime, fly ash, gangue, river sand and aluminium powder ect., through batching, mixing, casting ,cuttimg and autoclaving. AAC has the advantages of extremely light weight, high compressive strength, excellent thermal insulation, great scousitc insulation and high fire resistance. AAC can be produced in a large variety of sizes, from stand blocks to large reinforced panels, and it can be cut, sawn ,drilled ,nailed and milled like wood, making it an extremely workable product, AAC is environment-friendly and new building material.

Advantages of the AAC block application

1. Sound proof

AAC wall has an excellent sound Transmission class (STC) ,rating of 44. Result: Virtually Soundproof Interiors

2. Thermal Insulation

It has highest thermal rating in the industry….R30! Thus provides well insulated interiors, keeping out warm air in summer and cold air in winters. AAC reduces Air conditioning cost by 30%.

3. Earthquake Resistant

Earthquake forces on structure are proportional to the weight of the building, hence AAC shows excellent resistant to earthquake forces. Regions of high seismic activity like Japan exclusively use AAC. It has been proven to withstand wind loads of category 5 tropical storms.

4. Floor Space Area

Use of thinner blocks (6" instead of 9" exterior walls) because of its excellent water barrier & insulation properties leads to an increase in floor space area between 3-5%.

5. Cost saving

Being lightweight AAC drastically reduces the dead weight of building, resulting into reduction in steel (up to 27%) and cement (up to 20%) structural cost saving. Being 8 times the size of a clay brick, AAC wall construction involves 1/3 the joints, thus an overall mortar saving up to 66%.

Its automatic manufacturing process gives AAC an exceptional dimensional accuracy & smooth surfaces, eliminating need of three-coat plaster walls and allows for a final 6 mm skim coat (putty/POP).

6. Fire Resistant

Best in class fire rating of 4 hours. The melting point of AAC is over 1600 ºc, more than twice the typical temperature in a building fire of 650 ºc.

7. Pest Resistant Termites hate AAC!

Being made of inorganic minerals, it does not promote growth of molds.

8. Water Barrier

Its structure does not allow for capillary action making it impervious to water. Its water barrier properties are further enhanced by adding silicone based additives.

Strength to weight ratio, higher than even M150 concrete and far exceeds the Indian Building code requirements.

9. Energy Efficient

AAC is 100% Green Building Material & is a walling material of choice in LEED certified buildings (ITC centre, the highest rated Green Building has been built using AAC).AAC is most energy & resource efficient in the sense that it uses least amount of energy & material per m³ of product. Unlike brick manufacturing process which uses previous top layer agricultural soil, AAC uses Fly Ash (65% of its weight), thus provides the most constructive solution to the nation's fly ash utilization problem.

General specification  

Aerated Autoclave Concrete Block is a lightweight AAC block manufactured through a reaction of aluminum powder and a proportionate blend of fly ash, lime, cement, and sand. AAC blocks manufacturing business idea in India is booming as the demand for these blocks is taking over the need for red bricks in India. The AAC Block manufacturing process involves the hydrogen gas escaping in tiny air cells and giving AAC blocks a durable cellular structure. AAC is light weighted, easily constructed, and economically cheap to transport.


 AAC brick manufacturing process involves the steps like mixing the mixtures followed by pouring the mixture into the block casting mold, further demolding and cutting of blocks with the help of wire, and then heating the blocks at high-pressure steam for 12 hours. The popularity of AAC blocks is increasing because it is environment-friendly, budget-friendly, and provides more resistance to the structure of the building. 
 

Size deviation

aerated concrete panel programme

1,Technological Standard

The technological standard of this project is superior products according to the Chinese national standards. The equipments are made according to Chinese standard and criterion

This project provides the mature tilting technology in China. 

2,Capacity

The product is AAC blocks with the capacity of 30,000m3- 300,000m3/year

3. Product specification

The products reach the block requirements of grade 04~07 of GB11968-2006

Hongfa is a complete solution supplier and a complete set of equipment production line supplier 

Hongfa Autoclaved Aerated Concrete(AAC) Block Production Line /gas concrete block machine layout 

Hongfa AAC production line includes:raw material preparation → mixing & pouring → molding → curing & cutting → steam generating system → autoclaving → finished products upload & packing

I .Raw material preparation for AAC plant 

1. Milling sand (fly ash no need mill) and to make slurry

2. Lime:crushing - milling (or to buy lime power directly)

3. Gypsum : to mill with sand or input with fly ash then to make slurry directly

II .Dry and wet ball mill for lime and sand 
 

III . Slurry  batching

The prepared and stored raw materials to be used are metered ,adjusted for temperature and concentration,and a small amount of dosing materials are metered on-site,and then fed to the stirring equipment in turn according to the process requirements .
 

IIII. Pouring 

In this process ,the materials that are put into the mixer after the previous batching prosess are measured and adjusted if necessary,and the materials that meet the time,temperature,and consistency requirements of the process are made,then pouring into the mold.the pouring process is an important process that can form a good pore structure,and it constitutes the core link of aerated production as the batching process

Guangxi Hongfa supplies complete set equipment of AAC block making machine AAC block wall panel production line AAC plant consult, supply annual capacity 50000 - 500000 m³ full automatic AAC brick production line 
   

Packing: Naked packing or stretch film packing or according to customers' requirements
Delivery time: Within 30 days after receipt of deposit and moulds confirmation from buyer

Exhibitions & cooperations

Hongfa, as a top brand enterprise in China, our products are also exported to Russia, Brazil, Thailand, Indonesia, Vietnam, Angola, Bangladesh, India, Australia, Sudan, etc., 132 countries and regions, deeply welcomed by clients from all around the world.

 

Hongfa Machinery Group Main Products :
Main products:

Lightweight Panel Production Line, AAC Block Production Line, Full Automatic 

Concrete Block Production Line, Artificial Quartz Plate Production Line, Concrete Pipe Machine, Concrete Tile Machine, Concrete pipe machine, Bidirectional Hydraulic Brick Maker, Mining Machinery,  Concrete Batching plant,  Stereo Parking Equipment,  etc.

Automatic Block Making:
QT12-15D   QT12-15  QT10-15D  QT10-15  QT9-15 QT8-15D 
QT8-15B   QT6-15D  QT6-15C  QT6-15B  QT4-15D  QT4-15C 
QT4-15B  QT4-20C  QTJ4-25
Semi-automatic:
QTJ4-35B2  QTJ4-40B2
Semi-automatic egg-laying machine:
QTY4-30  QMJ4-45  QTJ2-45  JMQ-6A 
Color Paver Color tile forming machine:
QT3-20   SMY8-150
HF-800 pipe-making machine  HF-2000 pipe-making machine
Concrete Mixing Plant:
HZS25  HZS35    HZS50  HZS60  HZS series
AAC Block production line : 50000~400000M3/Year