Description
Pneumatic glass suction hoist/ Glass Lifter
DescriptionPneumatic glass suction hoist is widely used in the handling of insulating glass, tempered glass, glass curtain wall, glass deep processing, solar photovoltaic glass and other industries. It saves time, effort and cost, is easy to use, and has no pollution; it is small and lightweight, single-handed operation, non-destructive handling of workpieces, No need for external power supply; It has the characteristics of ergonomic design, sound and light alarm system, energy storage device, high safety, long service life, etc.; It forms a complete lifting and handling solution with the crane/cantilever crane.
Product parameters: (Glass lifter size and working capacity can be customized)| Working capacity | Lifting Pump Dimension | Rotation Pump
Dimension | Turning-over Pump
Dimension | Suction Cups OD | Cup Qty | Lifter Max Dimension | Lifting Range
customized Available | Rotation | Turning Over | Self Weight |
| 300kg | SU100*1000 | SU80*400 | SU80*300 | 250 | 4 | 1150*780 | 1m | 90°/360° | 90°/360° | 120kg |
| 400kg | SU125*1000 | SU100*400 | SU100*300 | 300 | 4 | 1200*820 | 1m | 90°/360° | 90°/360° | 130kg |
| 500kg | 160*1000 | SU125*400 | SU125*350 | 300 | 6 | 1200*820 | 1m | 90°/360° | 90°/360° | 155kg |
Product configuration:1. The original imported generator from Taiwan AirTAC is the core part of the vacuum system, with large flow, small size, convenient maintenance and long service life.
2. The original imported air cylinder from Taiwan Airtac has fast action, energy saving and environmental protection, and long service life.
3. Japanese SMC vacuum pressure gauge, precise pointer and sensitive response.
4. Japanese SMC check valve, when the system has a power failure. . , Automatically shut off the vacuum pump and the atmospheric passage, provide enough pressure holding time to ensure that the workpiece will not suddenly fall.
5. Using high-strength Q345B material profile, high strength and elasticity, the equipment is not easy to change.
6. Imported silicone suction cup, three-layer sealing ring, better sealing.Features1. High stability and simple operation. Adopting the principle of pneumatic assist, only need to operate the control button to complete the handling process of the workpiece.
2. High efficiency and short handling cycle. When loading, the operator can control the movement of the workpiece in the space with a small force, and can stop at any position, and the handling process is easy, fast and consistent.
3. High safety performance, air cut protection and automatic braking device are installed. When the power supply suddenly disappears, the plate will remain in the original position for a period of time without falling. It is convenient for the operator to remove the glass.
4. The main components are all internationally renowned brand products, and the quality is guaranteed. This instruction manual describes its use and precautions in detail. For better operation of the equipment, please read this instruction carefully and keep it properly before use.
Product use attention:1. When using a crane or forklift to carry pneumatic suction cups, do not manually support the pneumatic suction cups! During transportation, the staff cannot climb on the pneumatic suction cup or stand under the pneumatic suction cup!
2. When installing the air supply, it must be connected after the air supply is cut off, and a striking sign must be set!
3. Before starting the pneumatic suction cup, please confirm whether the installation of each system is correct to ensure safety!
4. When the pressure of the vacuum pressure gauge is lower than 0.04MPa, it is prohibited to suck and hang the glass!
5. The customer's unauthorized modification of the product is not covered by the company's warranty, and the company is not responsible for it!
6. It is strictly forbidden for the pneumatic suction cup to exceed the maximum load, as overloading will cause serious consequences!
7. The operation of starting the suction cup must be carried out by qualified personnel!
8. It is forbidden to enter the range of movement of the pneumatic suction cup to avoid personal injury!
9. The operation and maintenance personnel of the pneumatic suction cup must wear safety protection equipment!
10. Do not touch moving mechanical parts to prevent personal injury!
11. Ensure that the air supply pressure of the air source is within the range of 0.6-0.8MPa. (Within ±10%)
12. When using pneumatic suction cups, please install a safety barrier in the active area.
13. Operators must go through special training, and only after passing the examination can they start working, and strictly abide by the safety operation regulations.
14. Do not carry objects other than the specified glass.
15. Do not transport glass that weighs more than 300kg.
16. Do not leave unguarded loads in the air.
17. Check whether the bolts and fasteners are loose, and tighten them in time if they are loose.
18. Connect the air source and adjust the air source pressure to 0.6-0.8MPa.
19. Check whether the lips of each suction cup are scratched.ApplicationCertification
Waiting for your inquiry.
Limited products with un-limited service!
Complaint
