Complaint
Feature:
1. Digital oscilloscope, dualchannel, bandwidth up to 100MHz, realtime sampling rate 1GS/s.Specification:
Condition: 100% Brand New
Item Type: Oscilloscope
Material: ABS
| General Technical Specifications | |||
| Display Type | 8in Color LCD Display | ||
| Display Resolution | 800 Horizontal x 600 Vertical Pixels | ||
| Display Color | 65536 Colors, TFT | ||
| Characteristic | Parameter | ||
| Bandwidth | 100MHZ | ||
| Vertical Resolution (A/D) | 8-Bit | ||
| Channel | 2 | ||
| Waveform Refreshing Rate | 45,000wfms/S | ||
| Sampling | Sampling Method | Normal Sampling, Peak Detection, Average | |
| Real-Time Sampling | Two Channels | 500MSa/S | |
| Single Channel | 1GSa/S | ||
| Enter | Input Coupling | DC, AC, Ground | |
| Input Resistance | 1MΩ±2%, in parallel with 15pF±5pF | ||
| Probe Attenuation Coefficient | 0.001X-1000X, step by 1-2-5 system | ||
| Maximum Input Voltage | 400V (DC+AC Peak Value) | ||
| Horizontal Scanning Range (S/Div) | 2ns/Div-1000s/Div, Step By 1-2-5 System | ||
| Vertical Sensitivity (Volt/Div) Range | 1mV/Div-10V/Div | ||
| Analog Bandwidth | 120MHZ | ||
| DC Gain Accuracy | 1mV, ±4%, ≥2mV, ±3% | ||
| Maximum Storage Depth | Turn On Single Channel, Up To 40M Points | ||
| Time Base Accuracy | Maximum ±10ppm (Ambient Temperature Is +25ºC) | ||
| Trigger Type | Edge, Video, Pulse Width, Slope, Runt, Over Amplitude (Windows Trigger), Timeout, Nth Edge, Logic, I2C, SPI, RS232, CAN (Optional) | ||
| Decoding Type | I2C, SPI, RS232, CAN | ||
| Trigger Method | Automatic, Normal, Single | ||
| Video Trigger | Signal System | Support any field frequency or line frequency NTSC, PAL and SECAM broadcasting system | |
| Line Frequency Range | The range of the number of rows is 1 to 525 (NTSC) and 1 to 625 (PAL/SECAM) | ||
| Measuring | Cursor Measurement | Voltage Difference Between Cursors (△V), Time Difference Between Cursors (△T), Time Difference Between Cursors & Voltage Difference (△T&△V), Automatic Cursor | |
| Automatic Measurement | Period, Frequency, Average, Peak-To-Peak, Rms, Maximum, Maximum, Small Value, Top Value, Bottom Value, Amplitude, Overshoot, Preshoot, Rise Time, Fall Time, Positive Pulse Width, Negative Pulse Width, Positive Duty Cycle, Negative Duty Cycle, Delay, Delay A→B, Delay A→B, Period Root Mean Square, Cursor Root Mean Square, Screen, Screen Pulse Width Ratio, FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF, Phase A→B, Phase A→B, The Number of Positive Pulses, The Number of Negative Pulses, Number of Rising Edges, Number of Falling Edges, Area, Cycle Area | ||
| Computation | Addition, Subtraction, Multiplication, Division, FFT, FFTrms, Differentiation, Integration, Square Root, Function Calculation, User-Defined Function, Digital Filtering (Low Pass, High Pass, Band Pass, Band Stop) | ||
| Decoding Type (Optional) | UART, I 2 C, SPI, CAN | ||
| Store Waveform | 100 groups of waveforms | ||
| Lissajous Graphics | Bandwidth | Full Bandwidth | |
| Phase Difference | ±3 Degrees | ||
| Communication | Communication Interface | USB Host, USB Device; Trig Out (Pass/Fail); LAN Interface | |
| Printer Compatible | PictBridge | ||
| Frequency Meter | Stand By | ||
| Output of Probe Compensator: | |||
| Output Voltage (Typical) | About 5V, when peak-to-peak ≥1 MΩ load | ||
| Frequency (Typical) | 1KHz square waves | ||
| Power Supply | 100V-240 VACRMS, 50/60 Hz, CAT | ||
| Power Consumption | <15 W | ||
| Multimeter | |||
| Digital Display | 4 Digits (Maximum display is 19999) | ||
| Diode | 0V-2V | ||
| Input Resistance | 10 MΩ | ||
| Continuity Test | <50Ω buzzer | ||
| Capacitance | 2nF - 20mF: ±(4.0%+10digit) | ||
| Voltage | DCV: 20mV, 200mV: ±(0.5%+10digit); 2V, 20V, 200V: ±(0.3%+5digit); 1000V: ±(0.5%+5digit) Maximum Input DC Voltage 1000V ACV: 20mV, 200mV, 2V, 20V, 200V: ±(0.8%+10digit) 750V: ±(1%+10digit) Frequency: 40Hz-1000Hz, Maximum Input AC Voltage 750V (Effective Value) | ||
| Current | DCA: 10A: ±(2%+10digit) ACA: 10A: ±(2.5%+10digit) | ||
| Impedance | 200Ω: ±(0.8%+10digit) 2KΩ ~ 2MΩ: ±(0.5%+3digit) 20MΩ: ±(0.8%+5digit) 100MΩ: ±(5.0%+10digit) | ||
| Battery | 7.4V, 8000mAh After battery is full charged, it can supply power for about 5 hours (for different models, it will be different). | ||
| Temperature | Working Temperature: 0ºC-40ºC | ||
| Storage Temperature: -20ºC - +60ºC | |||
| Relative Humidity | ≤90% | ||
| Height | Operating 3,000 Meters Non-Operating 15,000 Meters | ||
| Cooling Method | Fan Cooling | ||
Package List:
1 x Oscilloscope
1 x Bracket
1 x Power Cord
1 x Adapter
2 x Multimeter Test Lead
2 x Oscilloscope Probe
1 x Micro USB Cable
1 x Bag
1 x CD
1 x Adjustable Accessory
4 x Color Ring
2 x IC Cap
2 x Grounding Spring
1 x BNC-SAM Synchronous Signal Interface
1 x Current Expansion Module
1 x Bracket Bag
3 x Manual
1. Are you a manufacturer or a trader?
Yes, we are both.
2. What products do you have?
We are focus on instruments and meters. Such as Mechanical / Optical /Power/ SafetyEnvironmental testing equipments and
some hardware tools amd eletronic components.
More infomation about business, please contact us we can send you catalog for reference.
3. Can i get a sample first?
Yes, we are pleased to send you sample to test the quality and market.
4. Can you do OEM for us?
Yes, OEM are welcome for us. Customers' brand, logo, label can be customized for the produets andcarton package, but based on a certain quantity.
5. What are your strengths?
We have a complete range of products covering low, medium and high-end markets in good price in Instruments field.
Fast Delivery, factory high quality and professional engineers to solve your problems.
