High Performance PU Polyurethane Adhesive Sealant

Min.Order: 1

Product origin: Kaifeng, Henan, China

Infringement complaint:

Complaint

US$ -1

Description

P100 High Performance Multi-purpose PU Polyurethane Adhesive Sealant

P100 is a multi-purpose, one-component, non-sag, gun-grade, high performance polyurethane adhesive sealant. Cures at room temperature in the presence of atmospheric moisture to give a permanent elastomeric rubber. Excellent adhesion characteristics for general sealing and bonding applications.

Features & Benefits:
▪ Excellent adhesion on all cement-based materials, brick, ceramics, glass, metals, wood, epoxy, polyester and acrylic resin.
▪ Fast cure rate.
▪ Good weathering and water resistance.
▪ Non-corrosive.
▪ Can be painted over with water, oil, and rubber-based
paints. (Preliminary tests recommended).
▪ High durability.
▪ Can be used in tamper resistant joints
▪ Movement capability of ± 12.5%

Applications:
As an elastic adhesive for:
▪ Cover plates, gaskets and coverings.
▪ Acoustic ceiling tiles.
▪ Floor moldings and door sills.
▪ Light weight construction materials.
▪ Wood or metal and door frames.
▪ Roof tiles.
As an elastic joint sealer for:
▪ Air ducts and high vacuum systems.
▪ Containers, tanks, and silos.
▪ Gaskets in openings in walls or floors for ducts, piling, etc.
▪ Reservoirs or water retaining structures.
▪ Aluminum fabrication.
▪ Bolted lap joints.

Technical Product Data (typical values)

Chemical basis	Polyurethane
Curing mechanism	Moisture curable
Tack free time(GB/T528)	Approx 60 minutes, depending on climate
Curing rate	>3 mm/24h
Density(GB/T13477)	1.45 g/ml, Approx.
Shore A hardness(GB/T531)	35, Approx.
Tensile Strength (GB/T528)	1.50 Mpa, Approx.
Elongation at break(GB/T528)	700%, Approx.
Tear strength (GB/T529)	7 N/mm, Approx.
Elastic Recovery	>85%
Application temperature	+ 5 °C ~ + 40 °C
Service Temperature	-40°C ~ +90°C
Storage Conditions	+ 4 °C ~ + 35 °C

Method of Application:
▪ Cleaning away the dust, greasy dirty and water. Please use steel brush to clean the easy peeling rust. If necessary, wipe the surface with alcohol or other solvents.
▪ No need primer under normal circumstances, for some special substate surface , please use the suitable primer in order to result in the best performance.
▪ Cutting nozzle as required size and screw up it on the sealant bottle, apply sealant by the manually-operated or compressed-Air sealant gun.

Caution:
▪ Please used up it when the sealant is opened , otherwise please seal the nozzle well.
▪ The best work condition is at the temperature of 15~25°C.
▪ Apply the water site,the sealant should be cured completely before water flooding.
▪ Make an adhesion and compatibility test between sealant and substrate prior to use.

Storage and Shelf Life:
▪ 12 months from date of production if stored in undamaged original unopened containers, in dry conditions and protected from direct sunlight at temperatures between +5°C and +25°C.

OEM is acceptable.
Welcome contact us. Thanks.

Forward

Related products