Heavy Duty Construction Bracking Strapping Tensioner

Min.Order: 20,000
Product origin: Rizhao, Shandong, China
Infringement complaint: complaintComplaint
US$ -1

Description
 

Company Profile

About Borhaf Metal Fabricator:


We specialize in all types of sheet metalworking/stamping, and metal pressing and can manufacture custom-pressed metal parts.
Our main production and processing are all types of precision sheet metalworking/ stamping parts, custom-made precision metal stamping, welding assembly parts, and Laser-cutting metal parts.
Our precision sheet stamping parts include Brackets, Bushings, Clips, Frame, Vehicle Processing Parts, Automobile Spare Parts, Medical Device Parts, Industrial Machines, Electric Appliance Parts, Furniture Parts, Agricultural Machinery, Electronics, Construction, Machinery Parts, and so on.


Main products: Sheet Metal Stamping, Sheet Metalworking, Metal Brackets, Metal Fabricated, metal laser cutting, Sheet Bending, Welding&Assemble, Mounting plate, Construction Wood connectors, Building Strut Channel Fitting, Agriculture Sprayer, auto spare parts, OEM order of all types sheet metalworking. etc

 

Product Description


Heavy Duty Bracing Strapping Tensioner

The Wall Brace Tensioner is an easy to use wall strap-brace tensioner that takes the slack out of strap bracing, saving time over other methods.

With the ability to pull as much as 20mm of slack out of a single strap, It resists tension loads only and should be used in pairs (one for each strap when in X brace configuration).

This unique tensioner tensions in just 3 seconds with either a hex or Phillips bit!

* Tensions your bracing in 3 seconds
* Bolt now with Phillips & Hex drive - saving time by changing bits!
* Anti-slip notch to prevent slipping or spinning
* Bolt shaped to prevent tearing in bracing galvanized coating

Material: Carbon Steel 2.0mm, 2.5mm, 3.0mm thick
Finish: Z275 Galvanised

 Installation

 * Place WBT near the center of the diagonal wall brace

 * Install bolt-through strap and WBT with nut facing towards the wall cavity

 * Tightening the nut requires a 10mm hex head-deep socket setter. Tighten until the slack is taken out of the strap

 Application

 Strap Brace Tensioners are used to pre-tension structural bracing strap after it has been installed on wall panels or roof trusses according to AS1684.





Strap Brace Tensioners Tensioners are used to pre-tension hoop iron strapping after it has been installed to brace wall panels or roof trusses according to AS1684. The two-piece bracket makes installation quick and easy.
 
  • A strap Brace is ideal for bracing applications where timber braces are not feasible because of their thickness or because timber can't be bent (eg. exposed beams, rafters, or trusses)
  • It saves on-site labor time as studs do not have to be notched - the unnotched studs can often be a smaller size and hence cheaper than notched studs.
  • Available in long-length coils for ease of handling and minimum wastage
  • Easily and quickly tensioned using the Strap Brace Tensioner - simply by driving the hex-head screw (nutsert option) or turning the wing nut (wingnut and t-bolt option)
  • The Strap Brace Tensioners are designed with a deeper saddle for improved tensioning capabilities, and a smoother edge finish for better manual handling

     
    Convenient multi-purpose bracing for roofs, ceilings, and walls.
    Brace with Tensioner is an easy-to-use, flat-strap steel bracing for roofs, walls, ceilings, and floors. The strap brace complies with the wall bracing rules of AS1684 Residential Timber-framed Construction.
     
We also produce the punched bracing strapping.  Metal strapping with holes" is a type of metal strapping that features evenly spaced holes along its length. These holes are designed to provide flexibility and allow the strap to be easily fastened to objects using screws, nails, or other hardware.

The holes also allow for better ventilation and drainage, making it ideal for use in applications where moisture or airflow are a concern.

Metal strapping with holes is commonly used in the construction industry for securing ductwork, pipes, and other equipment in place, as well as for bundling and securing materials during transportation.

 

  •  
  •  

Workshop & Machine

 

Machine Facilities List 
NumberDevice NameQuantityRemark
16000W Laser Cutting Machine2Can Cut Steel Plate to 30mm Thick
21500W Laser Cutting Machine2Can Cut Steel Plate to 16mm Thick
3250 Ton CNC Press Brake Machine1Bending Length can be 3200mm
4500 Ton Oil Hydraulic Machine1Suit for Deep Stretching
5250 Ton Stamping Machine1Suit for Stamping and Pressing
6160  Ton Stamping Machine3Suit for Stamping and Pressing
7125 Ton Stamping Machine1Suit for Stamping and Pressing
8100  Ton Stamping Machine5Suit for Stamping and Pressing
980  Ton Stamping Machine1Suit for Stamping and Pressing
1063  Ton Stamping Machine3Suit for Stamping and Pressing
1140  Ton Stamping Machine1Suit for Stamping and Pressing
1235  Ton Stamping Machine1Suit for Stamping and Pressing
13 CNC Pipe Bending Machine1 For Pipe Bending 
14Polishing Machine 12500mm Leng Part Can Be Polished
1516*2500 Plate Cutting Machine2Can Cut the Steel Platd to 16mm
166*2500 Plate Cutting Machine1Can Cut the Steel Platd to 6mm
17Carbon Dioxide Protected Welding Machine14Welding 
18           TIG Welder6Welding 
19Saw Blade Cutting Machine2Cutting 
 

Detailed Photos

 





 Application:





 

Measuring Tool

 

We provide all types of sheet metal fabrication metalworking/stamping and Laser cutting. Beyond stamping, services include Blanking, Deep-drawing, Bending, Punching, Drawing, Piercing, laser cutting, welding, and deburring operations. We also will provide surface treatments such as Polishing, Galvanizing, Heat Treating, Painting, etc

please provide your requirement or drawing to us. (ex: material/quantity/tolerance / 3D file/surface treatment / special requirement). or to make any other requests. We'll be sure to follow up with you as soon as possible.



 

FAQ

 

Q: What materials do you offer for metalworking and sheet metal parts?
A: We offer a wide range of materials, including steel, stainless steel, aluminum, and various metal alloys. Our team can recommend the best material for your specific application based on your requirements and industry standards.


Q: Can you provide custom metalworking and sheet metal parts?
A: Yes, we specialize in custom metalworking and sheet metal parts. Our experienced design and engineering team can work with you to develop custom parts that meet your specific needs and requirements.


Q: What quality control processes do you have in place to ensure the quality of your products?
A: We have a comprehensive quality control system in place, including rigorous inspection processes at various stages of production. Our facility adheres to ISO and other industry-specific certifications to ensure that our products meet the highest quality standards.


Q: What is your typical lead time for producing metalworking and sheet metal parts?
A: Our lead times vary depending on factors such as the complexity of the project, material availability, and production capacity. We work closely with our clients to provide accurate lead times and strive to meet their delivery deadlines consistently.


Q: Can you provide samples of your metalworking and sheet metal parts?
A: Yes, we can provide samples for your review and approval before proceeding with full-scale production. We believe that this is an essential step in ensuring that our products meet your expectations and requirements.


Q: Do you offer design and engineering assistance for metalworking and sheet metal projects?
A: Yes, our experienced design and engineering team can provide support and guidance throughout the development process, from the initial concept to the final production. We can help with material selection, design optimization, and manufacturability considerations to ensure the success of your project.


Q: How do you ensure competitive pricing for your metalworking and sheet metal parts?
A: We continually evaluate and optimize our production processes, material sourcing, and supply chain management to offer competitive pricing without compromising on quality or service.


Q: What industries do you typically serve with your metalworking and sheet metal parts?
A: We serve a diverse range of industries, including automotive, construction, electronics, aerospace, defense, medical equipment, and more. Our team has the expertise and experience to meet the specific needs and requirements of various industries.


Q: Do you have experience working with clients in the North American market?
A: Yes, we have extensive experience working with clients in the North American market. We understand the unique requirements and standards of this region and are committed to providing high-quality products and services to our North American customers.


Q: What post-sales support do you offer for your metalworking and sheet metal parts?
A: We provide comprehensive post-sales support, including troubleshooting, technical assistance, and replacement parts if needed. Our goal is to ensure the ongoing success of your project and maintain a long-term partnership with our clients.

 

Scroll to Top