Complaint
Technical date | ||
Spindle head | type | FL220 h5 |
Spindle maximum speed | rpm | 3000 |
Max. Torque | N×m | 420 |
Spindle power | Kw | 15-18.5 |
Chuck diameter | mm | 250 |
Spindle bore | mm | 102 |
Front bearing diameter | mm | 140 |
Spindle bearing lubrication | type | Grease |
Linear motion lubrication | type | Oil |
Speed range | rpm | 5-3000 |
Work area | ||
Maximum swing over bed | mm | 680 |
Maximum cutting diameter | mm | 465 |
Maximum cutting length | mm | 1000 |
Maximum bar capacity | mm | 75 |
Travel of Z-axis | mm | 1050 |
Travel of X-axis | mm | 260 |
Travel of Y-axis | mm | ±60 |
Ball screw | ||
X/Y/Z axis ballscrew DxP | mm | 40 x 10/40 x 5/40 x 10 |
Feed | ||
Rapid traverse Z | m/min | 24 |
Rapid traverse X | m/min | 24 |
Rapid traverseY | m/min | 12 |
Rapid traverse C | m/min | 100 |
Feed force | ||
Feed force X/Z | N | 7500 |
Number of axis | 4 | |
Measuring system | ||
X/ Y/Z axis measuring system | Absolute rotative | |
(X / Y/Z);VDI/DGQ 3441 Positioning | mm | 0.008/0.008/0.01 |
(X /Y/ Z);VDI/DGQ 3441 Repeatability | mm | 0.005/0.008/0.008 |
Tool attachments | ||
Power turret | BMT55 | |
No. of tool stations Driven tools | # | 12 |
T-T time | sec | 0.25/0.5 |
OD tool size | mm | 25/40 |
Maximum speed of tool driven | rpm | 3000 |
Tool driven power | Kw | 3 |
Max. torque of tool driven | N×m | 45 |
Electrical specifications | ||
Voltage | V | 380 ±10% |
Frequency | Hz | 50 ± 1% |
Max. installed power | KVA | 50 |
400v lie protection fuses | A | 100 |
Connection cables section | mm2 | 4 x 10 |
Hydraulic unit | ||
Max. working pressure | bar | 50 |
Reservoir capacity | l | 35 |
Pump flow | I/ in | 24 |
Coolant system | ||
Pump delivery/Capacity with tank | l /min | 30/180 |
Pump pressure | bar | 5 |
Noise level | ||
Less than | dB (A) | ≤80 |
Control system | ||
FANUC | - | 0iTF plus |
Net weight | kg | 7800 |
