Complaint
First,slitting line will uncoil the coil with a decoiler, then cut the metal sheet longitudinal.Next, the tension stand can separating the steel coil to adapt the recoiler.That can make the steel coil has back pull power.In the end, the strips can be recoil into the recoiler system.
About our Automatic Metal steel sheet coil slitting machine production line
1. It is restricted to cutting relatively thin metal materials and then to narrow strips for easy using.
2. It can involve both ferrous and nonferrous metals.
3. Generally requires a high quality production tool to assure consistent quality in controlling metal width.
4. Slitting blades are designed depending on the job required. By the spacer adjustment, and cutting balde adjustment, you can make small thin coil.
| No. | Item | Specification |
| 1 | Formed Material | PPGI PPGL GI GL |
| 2 | control method | manual and Automatic |
| 3 | Voltage | 380V 50Hz 3Phase or as your requirement |
| 4 | sheet coil thickness (mm) | 0.3-3.0mm |
| 5 | Material width(mm) | As your requirement |
| 6 | inner diameter of steel coil | 508mm |
| 7 | The size of the roll forming machine | about 11000 mm *1300 mm X 1500 mm |
| 8 | Speed | 0-40m/min |
