Complaint
300Mbps Outdoor PTP PTMP with 2 *10/100 Mbps RJ45 Port and support long range Wi-Fi coverage application
Specification: | |
| Hardware: | |
| Chipset | Qualcomm 9531 |
| Wireless | 802.11N, 2T2R 300M MIMO Technology |
| Memory | 64MB DDR2 RAM (128MB available by extra cost) |
| Flash | 16MB |
| Interface | 2 *10/100Mbps RJ45 Port, support 12~24V PoE |
| 1 * Reset Button | |
| 1 * DC Injector, 12V/1A | |
| 1 * LED display | |
| 1 * F(Function) switch button | |
| 1 * S(Select) button, press it to setup PTP/PTMP connection | |
| Antenna | 14dBi Panel Antenna |
| LED Light | POWER Wi-Fi WAN LAN |
| Size | 260mm * 85mm * 45mm |
| Power | 12V(POE 24V)/1A;110V/220V |
| RF Data | |
| RF Data | 802.11b/g/n: |
| 2.312GHz to 2.4835GHz | |
| Korea, Japan, ETSI, FCC, Debug | |
| Modulation | OFDM = BPSK,QPSK, 16-QAM, 64-QAM |
| DSSS = DBPSK, DQPSK, CCK | |
| Data Rate | 300Mbps |
| Receive Sensitivity | 802.11n: -70dBm@MCS7, -88dBm@MCS0. 802.11g: -72dBm@54Mbps, -90dBm@6Mbps. 802.11b: -85dBm@11Mbps, -94dBm@1Mbps. |
| RF Output Power | 802.11n: @MCS7:26±2dBm, @MCS0:28±2dBm. 802.11g: @54M:27±2dBm, @6M:29±2dBm. 802.11b: @11M:28±2dBm, @1M:30±2dBm |
| EVM | 802.11n: ≤-28 DB 802.11g: ≤-25 DB 802.11b: ≤-10 DB |
| PPM | ±20ppm |
| End User | 64 |
| Firmware | |
| Operation Mode | Wireless AP, Wireless Bridge |
| Protocol/Standard | IEEE 802.3(Ethernet) |
| IEEE 802.3u(Fast Ethernet) | |
| IEEE 802.11b/g/n(2.4G WLAN) | |
| Wireless | Auto-Channel selection |
| Distance Control (802.1x Ack timeout) | |
| BSSID | |
| Security | WEP Encryption-64/128/152 bit |
| WPA/WPA2 Personal (WPA-PSK using TKIP or AES) | |
| WPA/WPA2 Enterprise (WPA-EAP using TKIP) | |
| Hide SSID | |
| System Setting | Web-based configuration (HTTP/Telnet) |
| Firmware upgrade | Upgrade firmware via web browser or TFTP |
| Administration | Admin Password can be configured |
| System monitoring | Status in hand , useful statistic and Event log |
| Log | Supports local logs, logs host, logs file export |
| Reset | Reset or factory defaults |
| Backup | Restore settings & configuration of the device to local file |
| Physical Property: | |
Temperature | Working: -40°C~55°C |
| Storage: -40°C to 70°C | |
| Humidity | 5%~95% (typical) |
| Package: | |
| CPE830D unit | |
| PoE Adapter | |
| User Manual | |
| LAN Cable | |
| Setting Accessory | |
| Frequency range(MHz) | 2400~2500 |
| Polarization | Vertical and Horizontal |
| Gain(dBi) | 2×14 |
| Half-power beam width(°) | H: 65 V: 30 |
| Front-to-back ratio(dB) | ≥25 |
| Input Impedance(Ω) | 50 |
| VSWR | ≤1.5 |
| Isolation between ports | ≥28dB |
| Cross-polar ratio | ≥15dB@0º ≥10dB@+/-60º |
| Sidelobe suppression for first sidelobe above horizon | 15 dB |
| Maximum input power(W) | 200 |
