Synthoglass Water Activated Composite Repair Leak Repair Corrosion Protection Tape

Min.Order: 1,000
Product origin: Xi'an, Shaanxi, China
Infringement complaint: complaintComplaint
US$ 2.5 ~ 10

Description

SynthoGlass Water activated Composite Repair Leak Repair Corrosion Protection Tape

It is a roll of fibreglass bandage impregnated with water-activated resin. You simply immerse the bandage in water for 4 seconds,then apply by wrapping around the damaged pipe area. A successful pipe wrap can be achieved in 30 minutes. It is a good solution moisture cured wrap system for Pipeline Mechanical Protection for corrosion.
PU resin fiberglass cast for pipe leaks and reinforcement
PU resin fiberglass cast is used in :
 
√ Can be used underwater or on wet surface.
√ Withstand temperature up to 120-150°C
√ Repairs leak in 30 minutes
√ Withstand pressure up to 3.1Mpa/31bar/450psi
√ Compressive strength: 27182psi
√ Hardness : 70 Shore D
√ Ideal for pipe reinforcement & corrosion protection
 
 
 
Many industries including (Oil & Gas, Petrochemical, Offshore, Chemical, Marine,
Power Generation, Building &Facilities Management, Water distribution,Wastewater,
Manufacturing plants, Industrial processing, Electronics,Pharmaceutical, Pulp & Paper, Agricultural,Food processing)
 
 
Ansen Pipe Repair Bandage is used for :
Ansen Pipe Repair Bandage applies to :
 
* Pipe repairs
   (Offline pipe repairs, Active leaks, Sealing joints,       
   Hazardous material spill control,Reinforce thinning   
   walls,Corrosion control & protection)
* Abrasion protection
* Structural reinforcement
* Repairs in hard to reach areas
* Underwater repairs
* Electrical conduit or cable repairs
 
 
 
* Any pipes(Steel, Copper, Aluminum, Galvanised,   
   Black Iron, Stainless Steel, PVC, CPVC,     
   Fiberglass,Polyethylene,Polypropylene)
* Pressure up to 450 PSI
* Temperature up to 150°C
* Pipe diameter up to 60″ (1524 mm)
* Liquid or Gas pipeline
* Permanent repair or extend service life of pipes

Specification
Name
Model
Size
Packing
polyurethane resin wrap bandage tape
PR002
50mm × 3.6m (2''×12'')
10 rolls ×10 rolls/ctn
polyurethane resin wrap bandage tape
PR003
75mm × 3.6m (3''×12'')
10 rolls ×10 rolls/ctn
polyurethane resin wrap bandage tape
PR004
100mm × 3.6m (4''×12'')
10 rolls ×10 rolls/ctn
polyurethane resin wrap bandage tape
PR005
125mm × 3.6m (5''×12'')
10 rolls ×10 rolls/ctn
polyurethane resin wrap bandage tape
PR006
150mm × 3.6m (6''×12'')
10 rolls ×10 rolls/ctn
1/2/3/4/5/6inch width, 3m/5m/6m/9m/10m/15m length, we can do.
Application:(two levels for saving costs)
Level 1
Level 1 is for normal Industrial, such as water
pipe repaired, sewer pipe repaired, etc.
Level 2
Level 2 is for high requirement of Industrial usage, such as oilfield, gas pipeline etc.
How to use it
1.Shut off the pressure and isolate leak. Clean, degrease and abrade substrate around leak site.
2.Put on gloves supplied with the Pipe Repair Bandage. Immerse Bandage in water or place under running tap water for 4 secs.
4.Wrap the Bandage tautly around the wrap site extending 50mm either side of damaged area.
5.Smooth the resin as it foams during curing and work resin into the base fabric in a 'tightening motion'. Restore pipe to service once Bandage is cured.
Company Profile
How to contact
SynthoGlass Water activated Composite Repair Leak Repair Corrosion Protection Tape SynthoGlass Water activated Composite Repair Leak Repair Corrosion Protection Tape SynthoGlass Water activated Composite Repair Leak Repair Corrosion Protection Tape
Product Tag:
Related categories:
Scroll to Top