Complaint
1, Drawings or samples from customers.
From drawings or samples we can know the sizes and material.
2, Make mold (tooling) .
We make molds according to samples or drawings.
3, Make samples and send them to customers.
Before mass production, we have to make samples and confirm the samples.
4, Mass production after samples confirmed.
During mass production, we can control the quality.
5, Packing & shipment.
PE bag inside, Carton outside. Carton sizes: 46cm*33cm*33cm, 33cm*33cm*33cm, if large quantity we will put the cartons on pallets.
6, After-Sales Service.
If any quality problems you can come back to me.
Description of Materials:
| Material | SIL(Silicone Rubber) |
| Advantage | 1,Excellent Rebound Resistance |
| 2,Excellent Oxygen and Ozone Resistance | |
| 3,Excellent Weathering and Heat Resistance | |
| 4,Excellent Heat and Low Temperature Resistance | |
| 5,Good heat insulation and heat dissipation. | |
| 6,Good electrical insulation | |
| Disadvantage | 1,Poor Aliphatic-solvent Resistance |
| 2,Poor Alkaline Resistance | |
| Temperature | -50ºC-220ºC, -60ºC-300ºC(special formula) |
| Application | 1,the household appliances industry seal or rubber parts, such as electric kettle, electric irons, microwave oven rubber parts. |
| 2,The electronics industry seal or rubber parts, such as mobile phone keys, shock pad DVD, cable joint seal etc. | |
| 3,Contact with the human body on various types of products on the seal, such as water bottles, water dispensers |
| Material | NBR(Nitrile Rubber/Buna-N) |
| Advantages | 1,Excellent Abrasion-Resistance,Good Rebound Resistance |
| 2,Good Tensile Strength and Elongation | |
| 3,Excellent Animal and Vegetable Oil Resistance | |
| 4,Good Oil and Fuel Resistance | |
| 5,Good Water Resistance | |
| Disadvantage | 1,Poor Oxygenated-Solvent Resistance |
| 2,Poor Ozone Resistance | |
| Temperature | -40ºC-100ºC, -55ºC-120ºC(special formula) |
| Application | 1,Fuel tank, lubricating oil tank and oil in the hydraulic oil, gas, water, silicone grease, silicone oil and other fluid medium rubber parts, especially the sealing parts. |
| 2,It is currently the most widely used, the lowest cost of rubber seals. |
| Material | EPDM |
| Advantage | 1,Excellent Weathering Resistance |
| 2,Excellent Ozone Resistance | |
| 3,Excellent Flame Resistance | |
| 4,Excellent Heat Resistance | |
| 5,Excellent Water Resistance | |
| 6,Excellent Oxygenated-Solvent Resistance | |
| Disadvantage | 1,Poor Oxygenated-Solvent Resistance |
| 2,Poor Oil and Fuel Resistance | |
| Temperature | -40ºC-120ºC, -40ºC-150ºC(Special formula) |
| Application | 1,Shower Sealings or parts |
| 1,Rubber parts for brake (brake) systems | |
| 2,Radiator (Automotive tank) seal |
| Material | FKM/FPM(fluoroelastomer) |
| Advantage | 1,Excellent High Temperature Resistance |
| 2. Excellent Abrasion-Resistance | |
| 3,Excellent Oil Resistance | |
| 4.Excellent Weathering Resistancee | |
| 5.Excellent Ozone Resistance | |
| 6.Good Water Resistance | |
| Disadvantage | 1.Poor Low Temperature Resistance |
| 2.Poor Oxygenated-Solvent Resistance | |
| Temperature | -20ºC~230ºC , -40ºC~250ºC(special formula) |
| Application | 1.For Auto |
| 2.For Aerospace | |
| 3.For Electronic Products |
If you don't need these rubber products, you can check our CATALOG for other products.
Process Flow:
Raw material test → Prescribe → Mixing Material → Cutting Material → First Cure → First Part Inspection → Casual Inspection
→ Burr Dealing → Eye Inspection → IPQC → Washing or Grinding → Post Cure → FQC → Packing
Packing & Delivery:
Packing: PE bag inside, Carton outside.
Carton size: 46cm*34cm*34cm,40cm*34cn*34cm 51cm*34cm*34cm, 29cm*23cm*19cm
Delivery: Large quantity by ship, small quantity by air or express.
FAQ:
1, Are you manufacture or trading company ?
We are manufacture and trading combo, we have two factories.
One located in Shangrao City, Jiangxi Province, one in Dongguan City, Guangdong Province.
2, Can I get samples from you ?
Of course, you can. If the samples you need we have in stock, you can get them for free,
only need to pay for the express cost.
3, What's the term of payment ?
Amount < US$2000, 100% paid in advance by T/T;
Amount >= US$2000, 40% T/T as deposit in advance, 60% T/T as balance before shipment.
4, Can you produce OEM products ?
Yes, we can produce products by your drawings or samples.
5, What's your MOQ ?
If we have the products in stock , the quantity by your requirement, If we don't have them in stock.
NBR, SIL, SBR, EPDM, NR: 100 US$; PU, HNBR, FKM: 150 US$
