Technical Specifications| Model | HTI-30WD |
| Nominal Cooling Capacity@7ºC | Kcal/h | 75164 |
| | KW | 87.4 |
| Nominal Cooling Capacity@12ºC | Kcal/h | 86172 |
| | KW | 100.2 |
| Max Power Consumption | KW | 23.26 |
| Power Source | | 3PH 380V/50HZ
(3PH 220V/380V/440V 60HZ) |
| Refrigerant | Type | | R22/R407C |
| | Control | | Thermostatic expansion valve |
| Compressor | Type | | Hermetic Scroll |
| | Max Power | KW | 9.84*2 |
| Condenser | Type | | Shell and tube |
| | Pipe connection | KW | 3 |
| | Water Volume | m3/h | 18.58 |
| Evaporator | Type | | Shell and tube+ SS tank
or SS coil in SS tank |
| | Coolant Flow | m3/h | 15.8 |
| | Inlet and Outlet | Inch | 3 |
| Pump | Power | KW | 3.0 |
| | Head | m | 20 |
| Unit Protection Modules | Motor Overload, High&Low Pressure, Chilled Water Over Temperature, Flow switch, Tank Level switch, phase protection, anti-freezing protection |
| Dimension | Length | mm | 1940 |
| | Width | mm | 950 |
| | Height | mm | 1750 |
| Weight | KG | 720 |
NOTE: The specifications based on the following design conditions:1.Chilled water supply/return temperature: 12ºC/17ºC2.Cooling water inlet/outlet temperature: 30ºC/35ºC3.Condensing temperature 35ºC, evaporating temperature 7ºC;4.Chiller should be used under 40ºCambient temperature.5.R407C, R410A, R134A for option.- 1ton=3.517kw=12000BTU=3024Kcal/h
- Chiller should be used under max 40C ambient temperature, if over 40C, please contact us for solution
We reserve the right to modify the specifications without further notice.
Features
1. Panels and frame are made from galvanized steel protected with polyester powder painting to ensure durability and protect against corrosive agents.
2. Hermetic scroll type compressor, with built-in thermal overload cut-out and crankcase heater, mounted on rubber vibration isolators.
3. External rotor type axial fans, equipped with direct drive motors, low noise, protection level IP54, provided with a protective outlet grille. Saw-shaped impellers provide large air volume, high durability and high air supply efficiency with low noise.
4. The condenser built with seamless copper tubes mechanically expanded into blue hydrophilic aluminum fins.
5. Evaporator built with high efficiency shell & tube type heat exchanger, factory insulated with flexible close cell material.
6. Electric panel consists of breakers and contactors for compressors & condenser fan motors, phase sequence protector and other necessary protection devices for the main components. Company Show
Hero-Tech Group Company Limited was established in 1997, which integrated with R&D, Production. Marketing and Technical service. Shenzhen Hero- Tech Refrigeration Equipment Co, Ltd, subordinated to Hero- Tech Group, was founded in Shenzhen Guangdong Province in2005, with registered capital RMB5,000,000.00. And we have our own heat exchanger processing factory and Casing processing factory.
Hero-Tech is dedicated to research and develop of industrial cooling and temperature controlling of the industry, products range including both air cooled and water cooled Scroll Chiller, Screw Type Chiller, Low Temperature Chiller, Explosion-proof chiller, Inverter type chiller Multi- control chiller High precision temperature control Chiller, Heating & Cooling Chiller and Oil chiller, etc.
FAQ
Q1: Could you help us to recommend the model for our project?
A1: Yes, we have engineer to check the details and choose the correct model for you. Based on the following:
Cooling capacity; If you don't know, you can offer the flow rate to your machine, temperature in and temperature out from your using part; Environment
temperature; Refrigerant type, R22, R407c or other, pls clarify; Voltage; Application industry; Pump flow and pressure requirements;
Any other special requirements.
Q2: How to ensure your product with good quality?
A2: All our products with CE certificate and our company Strictly comply with ISO900 quality management system.
The units will be fully tested before package and The packing will be carefully checked.
Q3: What's the warranty?
A3: 1 year warranty for all parts; Whole life labor free!
Q4: Are you a manufacturer?
A4: Yes, we have more than 23 years in industrial refrigeration business. Our factory located in Shenzhen; Welcome to visit us at anytime. Also have patent on the chillers' design.
Q5: How can I place an order?
A5: Contact our online customer service.
Complaint
