DD50/2 FINCM CNC Double-Spindle Horizontal Universal Drilling Deep Hole Cnc 5000mm*700mm

Min.Order: 1
Product origin: Jinan, Shandong, China
Infringement complaint: complaintComplaint
US$ 348000 ~ 389000

Description
Product Description

DD50/2 FINCM CNC Double-Spindle Horizontal Universal Drilling Deep Hole Cnc 5000mm*700mm 

    This equipment is mainly composed of longitudinal sliding table, vertical column sliding table, double-spindle feed sliding table, worktable and bending plate, hydraulic system, cooling system, automatic lubrication system, electrical system, chip conveyor, etc.
     This DD50N/2 is mainly used for processing the holes on the tube plate of the shell and tube heat exchanger used in the petroleum, chemical, pharmaceutical, thermal power station, nuclear power plant and other industries. The maximum diameter of the workpiece is φ4000mm (need to be turned 180°), and the maximum drilling The depth is 750mm. The machine tool has high efficiency and good accuracy. The surface roughness of the drilling can reach Ra6.3~Ra3.2, the precision of the hole diameter can reach IT9~IT10, and the straightness of the hole is 0.3-0.8mm/800mm.

Equipment advantages:
1. This machine is a horizontal deep hole drilling machine.
2. The X, Y, and Z axes of the machine tool are guided by linear roller guides, which have extremely high load-bearing capacity and superior dynamic response performance, no backlash, and high motion accuracy.
3. The worktable of this machine tool is separated from the bed, and the clamping workpiece is not affected by the vibration of the bed. The working table is a casting with stable precision. The bending plate holding the workpiece is divided into two pieces, and the spacing is adjustable to adapt to workpieces of different diameters.
4. This machine tool has two spindles, which can work at the same time, and the efficiency is nearly double that of a single-spindle machine tool.
5. This machine is equipped with a flat chain type automatic chip conveyor, which is fully automatic.
6. This machine tool is equipped with an automatic lubrication system, which can regularly lubricate the parts that need lubrication such as guide rails and lead screws to effectively ensure the stable operation of the machine tool and increase the service life of each component.
7. This machine tool numerical control system adopts FAGOR8055 numerical control system, equipped with electronic handwheel, which is convenient for operation and management.
8. This machine tool has a variety of detection functions, including: 1) Spindle feed torque detection. 2) Spindle motor torque detection. 3) Flow detection. 4) Pressure detection. 5) Liquid level detection. 6) Temperature detection.
9. The machine tool's linear guide pair, ball screw pair, servo motor and its driver, planetary reducer, internal cooling joint (for gun drill), CNC system, hydraulic pump, valve and other machine tools have very high reliability. Comparable to imported machine tools, with fewer failures and high start-up rate.
Detailed Photos

Main Technical Specifications: 

Parameter nameProjectParameter value
Processing rangeMaximum workpiece diameterΦ5000mm
Borehole diameterBTA drillΦ14~Φ40mm
Maximum drilling depth750mm
Drilling headQuantity2
Spindle center distance (adjustable)170~220mm
Main shaft front bearing diameterφ65mm
Spindle speed200~2500r/min
Spindle variable frequency motor power2×15kW
Longitudinal slide movement
(x-axis)
Travel4000mm
Maximum movement speed4m/min
Servo motor power4.5kW
Vertical slide movement of column
(Y-axis)
Travel2000mm
Maximum movement speed4m/min
Servo motor power4.5kW
Movement of double spindle feed slide
(Z axis)
Travel900mm
Feed rate0~4m/min
Servo motor power2.0kW
Hydraulic systemHydraulic pump pressure / flow2.5~4MPa,25L/min
Motor power of hydraulic pump3kW
Capacity of hydraulic oil tank120L
Cooling systemCooling pump pressure / flow6.5MPa,2×200L/min
Cooling pump motor power2×22kW
Cooling tank capacity3000L
Industrial refrigerator power14kW
Flux of magnetic roller paper tape filter2×200L/min
Filtration accuracy25μm
Chip removalChip conveyor typeFlat chain
Chip removal speed2m/min
Chip removal motor power0.75kW
Pump motor power / flow2×1.5kW/2×200L/min
electrical systemNumerical control systemFAGOR8055
Number of NC axes3
Total power of motorAbout 112kW
Machine tool dimensionsLength × width × heightAbout 14×7×6m
Machine weight About 70t
AccuracyX-axis positioning accuracy0.10mm/ overall length
X-axis repeat positioning accuracy0.05mm
Positioning accuracy of y-axis0.08mm/ overall length
Y-axis repeat positioning accuracy0.04mm
Tolerance of hole spacingDrilling face±0.10mm
Drill out±0.3-0.8mm/800mm
Hole roundness0.02mm
Aperture accuracyIT9~IT10

Working temperature: 0ºC~40ºC
power:3 phase 4 wire;  voltage:380±10%V  ;  frequency:50HZ



List of the Key Outsourced Components:

 

NONameBrandCountry
1linear guide railHIWIN/PMITaiwan(China)
2Numerical control systemFAGOR8055Spain
3Planetary gear reducerAPEXTaiwan(China)
4Internal cooling jointDEUBLINUSA
5Oil pumpJUSTMARKTaiwan(China)
6Hydraulic valveATOSItaly
8Feed servo motorPanasonicJapan
9Switch, button, indicator lightSchneider/ABBFrance / Germany
10Automatic lubrication systembijur/hergUSA / Japan


Note: The above is our fixed supplier. If the supplier can not supply the components in case of any special matter, we will adopt the components with the same level, but the quality is no worse than the above.
 

Other Products

Company Profile


    Shandong FIN CNC MACHINE CO., LTD. is always focusing on our ultimate goal - to secure and increase our customer's productivity - has made us the leader in China market in the manufacture of machines for processing angle bar, beam channel profiles, steel plates, tubesheet and flanges, mainly serving for fabricating iron towers, steel structure, heat exchangers, boilers, bridges, and trucks.Strong R & D center with 30 engineers team, 24 years of experience from year 1997, 280 staff, plant area about 270,000 sqm., very harsh quality control of every component and the whole machine, about 40 million US dollars sales turnover per year.
   FIN CNC machines' market share in China is around 70% and exported to 50+ countries across globe market. All top ranked tower manufacturers, steel structure fabricators and power station makers, bridge/railway manufacturers, truck makers are our clients.
  Main products: CNC Angle Line, CNC Beam Drilling Sawing Machine, CNC Plate Drilling Machine, CNC Rail Processing Machine, CNC Tubesheet Flange Drilling Machine, Truck beam plate punching machine, etc..One measure of the outstanding quality of our machines is their longevity: many FIN machines have been in operation for more than 17 years! Many clients are continually placing repeated orders which verified well our machines' perfect quality and reliable performance.
The company drafted many China national standards for CNC angle line machine and CNC beam drilling sawing machine and CNC plate drilling machine.

Product Process Control

Cooprative Supplier

Sales Network

 

Our Service



FAQ:

1. When can you arrange shipment?

  For machines available in stock, the shipment can be arranged within 15 days after getting advance payment or L/C;
  For machines non available in stock, the shipment can be arranged with 60 days after getting advance payment or L/C.

2. What can you do if my machines have problems?

  1) We can send you free components if machines are in warranty period;
  2) 24 hours service on line;
  3) We can assign our engineers to serve you if you want.

3. Do you provide machine operation training?

  Yes. We can send professional engineers to the working site for machine's installation, commissioning and operation training.

4. Which machine model shall I choose when I purchase from you?

  Please share us your material size and your processing request, then we will recommend our machine most suitable and most cost effective for your work demand.

5. What's your machine's market share in China?

  Our market share in China is about 70%+, and we've exported to 50+ countries across the globe market, since year 1998.

Product Tag:
Related categories:
Scroll to Top