Complaint
| Working room(L) | 150 | 225 | 408 | 800 | 1000 | |||||
| Inner chamber size(mm)W*H*D | 500*600*500 | 500*750*600 | 600*850*800 | 1000*1000*800 | 1000*1000*1000 | |||||
| Exterior chamber size(mm)W*H*D | 1000*1600*1400 | 1000*1750*1500 | 1100*1850*1700 | 1500*2000*1700 | 1850*1600*2250 | |||||
| Packaging volume(CBM) | 3 | 3.5 | 4.5 | 5.5 | 6 | |||||
| G.W.(KGs) | 320 | 350 | 400 | 600 | 700 | |||||
| Performance | Temperature range | -160ºC,-150ºC,-120ºC,-100ºC,-80ºC,-70ºC,-60ºC,-40ºC,-20ºC,0ºC~+150ºC,200ºC, 250ºC,300ºC,400ºC,500ºC | ||||||||
| Testing temperature range | -160ºC,-150ºC,-120ºC,-100ºC,-80ºC,-70ºC,-60ºC,-40ºC,-20ºC,0ºC~+150ºC,200ºC, 250ºC,300ºC,400ºC,500ºC | |||||||||
| Humidity range | 20%RH ~98%RH(10%RH ~98%RH or 5%RH ~98%RH) | |||||||||
| Temp.fluctuation | ±0.5ºC(Room pressure) | |||||||||
| Temp.accuracy | ±2.0ºC(Room pressure) | |||||||||
| Heating up time | ≤60min(+20ºC~+150ºC,RP,No-Load) | |||||||||
| Cooling down time | ≤45min(RP) | ≤60min(RP) | ≤90min(RP) | |||||||
| Pressure range | Atmospheric pressure~-98KPa,~133KPa,~0KPa | |||||||||
| Pressure control tolerance | ±0.1kPa(≤2kPa),±5%(2kPa~40kPa),±2kPa(≥40kPa) | |||||||||
| Depressurization time | ≤20min | ≤25min | ≤30min | ≤45min | ≤50min | |||||
| Working environment | Temp:+5ºC~+35ºC;Humidity:≤90%RH;Air pressure:86-106kPa | |||||||||
| Material | Exterior chamber materia | Stainless steel plate+ powder coated | ||||||||
| Inner chamber materia | SUS#304 stainless steel plate | |||||||||
| Insulation Material | PU Fiberglass wool | |||||||||
| System | Air circulation system | Cooling fan | ||||||||
| Heating System | SUS#304 stainless steel high-speed heater | |||||||||
| Humidification system | Imported compressor,Tecumseh compressor(or Bizer Compressor),finned type evaporator,air(Water)-cooling condenser | |||||||||
| Dehumidification system | ADP critical dew point cooling/dehumidifying method | |||||||||
| Vaccuum system | Equipped with vacuum pump | |||||||||
| Controlling system | TEMI880,990 | |||||||||
| Power kw | 8 | 10 | 12 | 15 | 20 | |||||
| Water supply | Water temperature:≤30ºC;water pressure:0.2~0.4MPa;flow rate:≥10T/h | |||||||||
| Other components | Specimen holders 2pcs,electrical wire 1pc(3M),pressure testing port. | |||||||||
| Safety protection device | Over-heat protection circuit breaker,Compressor overload protection,Control system overload protection,Humidifying system overload protection,Overload indicator lamp. | |||||||||
| Power supply | AC 3Ψ380V 60/50Hz | |||||||||
