High altitude low pressure chamber | ||||||
Model | B-T-L080 | B-T-L-150 | B-T-L-225 | B-T-L-408 | B-T-L-800 | B-T-L-1000 |
Inner chamber size(W×H×D cm) | 40×50×40 | 50×60×50 | 50×75×60 | 60×85×80 | 100×100×80 | 100×100×100 |
Exterior chamber size (W×H×D cm) | 60x172x120 | 121×160×125 | 121×175×135 | 131×185×155 | 171×200×155 | 171x200x175 |
Test temp.range | -60ºC~150ºC | |||||
Temp.fluctuation | ±0.5ºC(Room pressure) | |||||
Temp.uniformity | ±2.0ºC(Room pressure) | |||||
Heating time | 3ºC/min(+20ºC~+150ºC,RP,empty load) | |||||
Cooling time | 1ºC/min | |||||
Pressure range | Room pressure~0.5KPa | |||||
Pressure control error | ±0.2kPa(≤2kPa),±2(2kPa~40kPa),±5%(≥40kPa) | |||||
Depressurization time | ≤45min | |||||
Exterior chamber material | Stainless steel plate+Powder coating | |||||
Inner chamber material | SUS#304 stainless steel plate | |||||
Insulation material | Fiberglass wool | |||||
Air circulation system | Cooling fan | |||||
Heating system | SUS#stainless steel high speed heater | |||||
Cooling system | APD critical dew point cooling/desiccant method | |||||
Components | Sample shelves 2pcs Electronical wire 1pcs(3m) Pressure test port | |||||
Safety protection device | Overheat protection circuit protection Compressor overload protection Control system overload protection Overload indicator phase sequency protection High voltage and low voltage protection Over temperature protection Fan overcurrent protection | |||||
Power supply | AC 3Ψ380V 60/50Hz | |||||
Customization service | Non-standard or special requirements are welcomed and available. |