Complaint
| Num | Item | Technical requirement | Remark |
| 1 | Input voltage | 380V±10%,50Hz±2Hz | Three phase and four wire |
| 2 | Microwave output power | ≥6kW | Continuous wave |
| 3 | Microwave output frequency | 2450MHz±15MHz | |
4 | Microwave conversion efficiency | ≥65% | |
| 5 | MW-Power adjust | 10%~100% continuous adjustment | |
6 | Flange joint | BJ22/BJ26 | |
| 7 | Control mode | Local control/communication | |
8 | Protection | Filament over current and under current; Anode overpressure and overcurrent; Magnetic field overcurrent; Ignition; Magnetron over-temperature; Water protection; reflection protection | |
9 | Volume | HF-Power supply: 482mm*177mm*556mm M-W Head:200mm*250mm*300mm | W*H*D |
10 | Usage environment | Work temperature:-10~40ºC Storage temperature:-20~50ºC Humidity:95%no condensation Altitude:<3000m | <0ºC antifreeze required |
11 | Cooling mode | Water | External supply of equipment, Flow≥2.5L/min |
| Num | Code | Form | Type | Pin | Definition | Characteristic |
1 | XS1 | Terminal block | TD40-01-C | 1 | A | Power supply |
| 2 | B | |||||
| 3 | C | |||||
| 4 | N | |||||
2 | XS2 | Terminal block | 2EDGRKP-5.08/WC-8P | 1 | VCC | +24V |
| 2 | TEMP | Temperature switch signal | ||||
| 3 | FLOW | Flow switch signal | ||||
| 4 | GND | 24VGND | ||||
| 5 | / | / | ||||
| 6 | A1 | PC communication | ||||
| 7 | B1 | |||||
| 8 | RGND | |||||
3 | XS3 | Terminal block | 2EDGRKP-5.08/WC-4P | 1 | VCC | +24V |
| 2 | GND | 24VGND | ||||
| 3 | A2 | Function expansion port | ||||
| 4 | B2 | |||||
4 | XS4 | Terminal block | 2EDGRKP-5.08/WC-2P | 1 | C+ | Magnetic field output+ |
| 2 | C- | Magnetic field output- | ||||
| 5 | X1 | Terminal | JS333(M6 black) | / | HGND | HV-GND |
| 6 | X2 | Stud | M6(butterfly shape) | / | PE | Safety GND |
7 | HV | HV- Conductor | White AEG-15kV-2.5mm² | / | FA | Filament output |
| / | A | Anode HV-Output | ||||
| 8 | IN | Quick screw joint | G1/4-Ø12*8 | / | / | Water inlet |
| 9 | OUT | G1/4 Ø12*8 | / | / | Water outlet |
| Num | Code | Form | Type | Pin | Definition | Characteristic |
1 | HV | High pressure tightness plug | BL-HV15kV | / | FA | Filament output |
BL-HV15kV | / | A | Anode HV-Output | |||
| 2 | X1 | Terminal | JS333(M6 black) | / | HGND | HV-GND |
| 3 | X2 | Stud | M6(butterfly shape) | / | PE | Safety GND |
4 | XS1 | Terminal block | 2EDGRKP-5.08/WC-6P | 1 | VCC | +24V |
2 | TEMP | Temperature switch signal | ||||
3 | FLOW | Flow switch signal | ||||
| 4 | GND | 24VGND | ||||
| 5 | / | / | ||||
| 6 | / | / | ||||
| 5 | IN | Quick screw joint | G1/4-Ø12*8 | / | / | Water inlet |
| 6 | OUT | G1/4 Ø12*8 | / | / | Water outlet | |
7 | / | Flange | BJ26 | / | / | MW-Output |
