Complaint
Layers from outside (Shiny) to inside (Mat) | Polyamide (JIS Z1714): 0.025mm (±0.0025mm) Adhesive (Polyester-polyurethane): 4-5 g/m2 Aluminum foil (JIS A8079, A8021): 0.040mm (±0.004mm) Adhesive (Urethane-free Adhesive): 2-3 g/m2 Polypropylene: 0.040mm (±0.004mm) |
Thickness | 113um |
Width | 400mm |
Length | 300m |
Surface quality | Mat finish |
Pinholes | Subject to the applicable aluminum foil standard |
Impurity | 1mm or less in diameter |
Fish Eye | 2mm or less in diameter (clear), 1mm or less in diameter (colored) |
Molding Depth | ≥5.0mm |
Electrical Insulating | Good |
Hot Sealing Coniditon | 180-190°C |
Moisture Vapor / O2 Transmission Rate | 200ppm / 5 years |
Laminate Strength | Nylon/Al more than 2N/15mm Al/CPP more than 5N/15mm |
Heat Seal Strength | More than 22.5N/15mm wide at 200ºC x 0.2Mpa x2 sec by TOB heat sealing |
