Complaint
| Product | Stainless Steel Sheets, Stainless Steel Roll,Stainless Steel Circle |
| Grade | 201 304 316 321 310 604l 2205 |
| Technology | Cold Rolling and hot rolled |
| Thickness | 0.19mm-5mm |
| Width | 10mm-1500mm |
| Length | Customized |
| Surface | BA, 2B, 2D, 6K, 8K, NO.1, NO.4, HL, Embossed |
| Edge | Mill Edge,Slit EdgeProduct |
| Hardness | Full hard, Soft, Semi-DDQ, DDQ (Deep drawing quality) |
| Protection | 1. Inter paper available |
| 2. PVC protecting film available | |
| The sizes or thicknesses of stainless steel coil can be customized, if you need additional information, please don't hesitate to contact us at any time. | |
| All standard products are supplied without inter paper & PVC film. If needed, please inform | |
| Grade and Main chemical composition% | |||||||||
| C | Si | Mn | P≤ | S≤ | Cr | Mo | Ni | Other | |
| 201 | ≤0.15 | ≤1.00 | 5.5-7.5 | 0.06 | 0.03 | 16-18 | - | 3.5-5.5 | N≤0.25 |
| 202 | ≤0.15 | ≤1.00 | 7.5-10.0 | 0.06 | 0.03 | 17-19 | - | 4.0-6.0 | N≤0.25 |
| 301 | ≤0.15 | ≤1.00 | ≤2.00 | 0.045 | 0.03 | 16-18 | - | 6.0-8.0 | - |
| 303 | ≤0.15 | ≤1.00 | ≤2.00 | 0.2 | ≥0.015 | 17-19 | ≤0.6 | 8.0-10.0 | - |
| 304 | ≤0.08 | ≤1.00 | ≤2.00 | 0.045 | 0.03 | 18-20 | - | 8-10.5 | - |
| 316 | ≤0.08 | ≤1.00 | ≤2.00 | 0.045 | 0.03 | 16-18 | 2-3 | 10-14 | - |
| 430 | ≤0.12 | ≤0.75 | ≤1.00 | 0.04 | 0.03 | 16-18 | - | ≤0.6 | |
| Surface Finish | Definition | Application |
| NO.1 | The surface finished by heat treatment and pickling or processes corresponding there to after hot rolling. | Chemical industry equipment,Industrial tanks… |
| 2B | Those finished, after cold rolling, by heat treatment, pickling or other equivalent treatment and lastly by cold rolling to given appropriate luster. | Medical equipment, Food industry, Construction material, Kitchen utensils… |
| BA | Those processed with bright heat treatment after cold rolling. | Kitchen utensils, Electric equipment, Building construction… |
| NO.4 | Those finished by polishing with No.150 to No.180 abrasives specified in JIS R6001. | Kitchen utensils, Building construction, Medical equipment… |
| HL | Those finished polishing so as to give continuous polishing streaks by using abrasive of suitable grain size. | Building Construction… |
| 8K | A mirror-like reflective surface by polishing with finer abrasives over 800 mesh | Reflector, Mirror, Interior-Exterior decoration |
Stainless steel is an alloy of Iron with a minimum of 10.5% Chromium. Chromium produces a thin layer of oxide on
the surface of the steel known as the 'passive layer'. This prevents any further corrosion of the surface. Increasing the
amount of Chromium gives an increased resistance to corrosion.
What is stainless steel
Stainless steel also contains varying amounts of Carbon, Silicon and Manganese. Other elements such as Nickel and Moly
bdenum may be added to impart other useful properties such as enhanced formability and increased corrosion resistance.
FAQ
Q1:How many coutries you already exported ?
A1:Exported to more than 50 countries mainly from America, Russia, UK, Kuwait, Egypt, Iran, Turkey, Jordan, etc.
Q2:How can I get some samples?
A2:Small samples in store and can provide the samples for free. Catalgue is available, most patterns we have ready samples in stock. Customized samples will take about 5-7days.
Q3:What is the MOQ?
A3:Stainless steel coils 3 tons, pattern sheets 50pcs.
Q4:What is the delivery ?
A4:Sample order's delivery time is 5- 7 days. Container orders are about 15-20 days.
Q5:How does your company do regarding quality control?
A5:BV and SGS certificates, production process followed the ISO 9000 system.
Q6:How To Protect The strips?
A6:as showed in above picture
Q7:What is the application about your Products?
A7: 1.elevator door/cabin or and escalator's side-wall. 2.Wall cladding inside or outside meeting room/ restaurant. 3.Facade when cladding over something, like columns in the lobby. 4.Ceiling in the supermarket. 5.Decorative draws in some entertainment places.
Q8:How long Can You Guarantee for This Product/Finish?
A8:Color guarantee for more than 10 years. Original materials quality certificate can be provided.
