Complaint
Feature:
virgin tungsten rods exten tool life;
2/3 flute helix design enables better chip breaking;
Up& down double cut give a better surface finish;
High precision grinded and polished, wearable and good heat resistance
Product Size:
| D | D1 | L1 | L |
| 6 | 6 | 20 | 55 |
| 8 | 8 | 25 | 70 |
| 10 | 10 | 25 | 70 |
| 10 | 10 | 30 | 75 |
| 12 | 12 | 30 | 75 |
| 12 | 12 | 40 | 90 |
| 12 | 12 | 50 | 100 |
| 16 | 16 | 30 | 75 |
| 16 | 16 | 40 | 90 |
| 16 | 16 | 50 | 100 |
| 12.7 | 12.7 | 25.4 | 76.2 |
| 12.7 | 12.7 | 28.6 | 76.2 |
| 12.7 | 12.7 | 34.9 | 88.9 |
Quality assurance:
1. All the raw rods are careflly selected and processed with advanced testing devices.
2.Coatings give extral power to the tool enabling heat resistant and more duarable life.
We supply all kinds of high value for money solid carbide End Mills ,but also different types of Drill Bits,Reamers,Tool Holders, Cutter Heads, Saw Blades and Inserts etc.
We have 0.03mm-32mm different flute diameter and 35mm-200mm overall length Milling Cutters for your winner market.
HRC45/55/60/65 , cutting balde 1-6 flutes for you to choose.
CNC Tungsten Carbide Single Flute End Mill for Aluminum
CNC milling of aluminum can be difficult, because the material can stick to the flutes and the chips can pack. Today's high
performance cutting tools for aluminum have large flutes to yield the maximum metal removal rates possible. They also feature
eccentric grinding on the outside diameters of the bits to give them strength and stability, and large flute gullets for high
metal removal rates. Aluminum milling bits are available in square end and ball end mill geometries. They are also available in 1,
2 and 3 flute end mill designs. These are the best carbide end mill bits for aluminum milling!
Advantages CNC Tungsten Carbide Single Flute End Mill for Aluminum
1. Innovative new geometries designed in conjunction. The benefit is a range of state-of-the-art carbide cutting tools with
superior performance.
2. Sub-micron carbide grade of origin.
3. Optimal flute geometry delivers maximum metal removal rates and better chip evacuation.
4. Effective in a full range of machine speeds.
5. Only one tool is needed for use in roughing and finishing operations.
6. Can take deeper and wider cuts - axial and radial.
7. Shank tolerances to h6.
8. Reinforced corner by extra positive dubbing for long tool life.
9. Centre cutting with drilling possibility.
10. Designed to works standard over the 1mm to 20mm diameter range.
11. Multiple corner radii and extended neck configurations are available to maximise metal removal rates.
Process introduction:
1. Surface TiSiN Coated
2. Strength2500-4000N/mm2 Controling ModeCNC
3. UsageMetal Chemical Composition6%-12%Co-WC
4. Density14.45-14.90g/cm3
5. Chemical Composition: 10%Co-Wc
6. Raw Material: Super Micro grain with Diameter less than 0.2UM
7. International Industrial Standard: K10, K05-K15, K20-K30, K20-K40
8. Application areas: Machining of cast iron, nonferrous alloy,chill cast iron,hard steel,stainless steel,plastic
materials,fiberglass,carbon fiber and other non-metallic.
