Complaint
Sewage Suction truck is used to collect, clean up and transport the sewage sludge, it is sanitation vehicle to avoid the secondary pollution.
Application: Sewage suction truck is suitable for the collection and transportation of feces, mud, crude oil and other liquid substances, sewage sludge suction, loading and unloading.
Features:Self-suction and self-discharge, fast working speed, large capacity, convenient transportation, sewage suction truck adopts technology leading dirt vacuum pump, good suction ability, long suction distance, especially can suck sewage mud, stones, bricks and other large objects.
Working principle: Using vacuum pump to pump the tank into a vacuum state, the external atmospheric pressure is greater than the internal atmospheric pressure of the tank, and the liquid material is pressed into the tank through the rubber tube.
We can produce all many kinds of sewage suction tanker truck (including different sizes, different materials, different colors and so on) according to your request. Welcome to contact with us!
| Chassis Model | ZZ1257N4641W |
| Driving Type | 4X2,6X4 |
| Cabin | HW76, with one sleeper and two seats, double arm windscreen wiper system with three speeds, damped adjustable driver's seat, with heating and ventilating system, exterior sun visor, safety belts, adjustable steering wheel, air horn, air conditioner, with transverse stabilizer, with four piont support floating suspension+shock absorber. |
| Engine | Make: SINOTRUK Diesel 4-stroke direct injection diesel engine Engine model: WD615.69, 336 HP;WD615.47, 371HP ;WD615.87,290HP; Emission :Euro 2 6-cylinder in-line with water cooling, turbo-charging and intercooling Displacement: 9.726 L |
| Transmission | HW19710, 10F & 2R with PTO |
| Front Axle | HF9,1x9000 KGS Steering with doubleT-cross section beam |
| Rear Axle | HC16, 2x16000 KGS Pressed axle housing, central single reduction with hub reduction,with differential locks between wheels and axles. Ratio:4.42 |
| Propeller Shaft | Double universal joint propeller shaft with gear-shaped coupling flange |
| Chassis | Frame: Uprofile parallel ladder frame with section of 300x80x8mm,reinforced subframe all cold riveted cross members Front suspension:10 semi elliptic leaf spring, hydraulic telescopic double-action shock absorbers and stabilizer Rear suspension:12 leaf semi elliptic springs, bogie spring and stabilizer |
| Brake | Service brake: dual circuit compressed air brake Parking brake (emergency brake): spring energy, compressed air operating on front shaft and rear wheels Auxiliary brake: engine exhaust brake |
| Electrics | Operating voltage: 24 V, negative grounded Starter: 24 V, 5.4 Kw Alternator: 3-phase, 28 V, 1500 W Batteries: 2 x 12 V, 165 Ah Cigar-lighter, horn, headlamps, fog lights, brake lights, indicators and reverse light |
| Tyres | 315/80R22.5, tubless tires with one spare tire |
| Fuel Tank | 400L |
| Tank Body | Volume: 15CBM; With rear back hole and anti-static . |
| Overall Dimension | 8950*2550*3250mm |
(1) 5-20 CBM,Equipped for lifting tank body
(2) Chassis: SINOTRUK/Dongfeng for choose.
(3) 2/3/4 Axle for choose.4*2/6*4/8*4 for choose.
(4) EURO II/ III/IV emission for choose.
Special performance
1. Sewage suction part is suitable for sucking, shipping and discharge of sediment in the sewer, especially sucking sewer mud, silt, gravel, bricks and other large objects.
2. Water cleaning jetting system is capable to clean an unclog sanitary drains.
3. The truck is capable to work on heavy roads (sand, dusty, mud).
4. Under the conditioner of high temperatures up to 40 °C, and high humidity environments, the suction pump is strong.
Jianxing Green Cattle International (Shandong) Co., Ltd. was established in 2021 in Jinan by Shandong Yuncheng Jianxing Special Vehicle Manufacturing Co., Ltd. Our company is located in Wanda Plaza in the Jingsi Road in the center of Jinan City.
At present ,the company mainly sells container flat semi trailer, container transport vehicle, semi dump truck, various series semi trailer,full trailer, van, car transport vehicle manufactured by Shandong Yuncheng Jianxing Special Vehicle Manufacturing Co., Ltd. There are more than 40 kinds of products and the weight of vehicles from 8 to 120 tons. In addition, Jianxing Green Cattle International(Shandong) Co., Ltd. to undertake special vehicle modification design business. The company' s products are exported to all over the world, such as southeast Asia, Central Asia, the Middle East, Africa and so on.
Transportion
1. How To Buy From Us ? How to Pay?
- quotation-offer-contract-1st payment-production-final payment-shipment-documentation;
TT/LC/Western Union/Credit Card
2. If Our Vehicle/Trailer Can Couple With Your Tractor Head ?
- 90% Of The Truck In The Market Can Coupling With Our Vehicle, As Howo, Shacman, Beiben
- If Other Brand Truck Head, Please Inform Our Sales Manager Before Order Placing
3. Whats The Time For Delivery & Arrival ?
- If Standard Model We Have In Stock Can Ship It Out Within 10 Days After Payment.
- If It Belongs To Customize Series, Ordinary Cases In 15 Days Can Be Finished For Shipment.
- For Asian Countries, Ship Can Be Reached In 1-2 Weeks, If For African & Mid East & European Countries,
25 Workdays Will Be Achieved.
4. If We Can Provide Terms For Reducing Your Import Duties ?
- Yes, Please Contact With Us, We Are Nationalized Manufacture With Tax Reduction
