Stainless Steel Sealing Manhole Cover Dish End Spherical Tank Head

Min.Order: 1

Product origin: Wenzhou, Zhejiang, China

Infringement complaint:

Complaint

US$ 3000 ~ 20000

Description

Manholes have been shaped products, usually 600mm in diameter. The center of the manhole is generally 750mm from the floor. It is convenient for the staff to enter and exit the oil tank or ventilate during installation, cleaning and maintenance.
The manhole of the non-metal oil tank is arranged on the top of the tank, and the manhole of the metal oil tank is arranged on the bottom plate of the tank wall. Most of them are round holes with a diameter of 600mm, with a center distance of 750mm from the bottom plate, which is used by oil tank cleaning or maintenance personnel to enter and exit the oil tank. It is also called a door. Use manholes for lighting and ventilation at all times during maintenance and cleaning of oil tanks. Vertical oil tanks have 1 to 2 manholes when the capacity is below 5000m3, and 2 manholes for those above 5000m3. The installation of the manhole should be no more than 90° away from the oil inlet and outlet pipelines. When only one manhole is provided, it should be placed on the opposite side of the light-transmitting hole on the top of the tank; when two manholes are provided, one of them is located on the opposite side of the light-transmitting hole, and the other should be separated from the first manhole by at least 90 °.

One manhole should be located near the right side of the oil inlet and outlet pipes, and try to make the manhole face the closed door of the tank chamber so as to facilitate the entry and exit of the oil tank, the maintenance of the oil tank and the ventilation pipe.
Since the manhole is installed on the bottom ring of the oil tank, leakage prevention is particularly important. It is required that the joint surface of the two flanges must be flat and free of twisting. Reinforcing plates and flanges should be cut on the whole steel plate as far as possible without splicing. The flange and cover plate are processed with sealing rings, so special attention should be paid to protection during construction. 3mm thick asbestos rubber gasket is used for sealing, no cracks are allowed. When installing the manhole cover to tighten the bolts, force evenly at diagonal angles to prevent the manhole cover from deforming.

Material	SS304 or SS316L
Size	435mm-535mm
Height	75mm
Thickness	8 or 10mm
Handle Material	Nylon or SS304
Gasket:	Silicon, EPDM, FPM
Working pressure:	0.5Bar
Surface Finishing	Ra≤0.8
Working Temperature:	+ 120°C (Silicon)
Packing Details:	Carton box or plywood case, or special packaging upon customer requirements

Divide

1. Divided by the capacity of the communication tube block
According to the manhole, the specification is 360mm wide and 250mm high (in the standard six-hole pipe hole
Stainless steel manhole
Cement pipe blocks with a diameter of 90mm, referred to as standard blocks) pipe section pipe blocks or single-hole pipe pipe holes with an inner diameter of 90mm, are divided into three categories: large, medium and small.
The size of the manhole installed in the communication pipeline shall be set according to the long-term capacity of the communication pipeline. We should not only consider the capacity of communication pipelines in the current period.

2. Divided by the direction of the manhole
Manholes can be divided into straight-through manholes, three-way manholes, four-way manholes and oblique-through manholes according to the direction of manholes. For details, see Table 1 below. Among them, the oblique manhole is divided into five types: 15°, 30°, 45°, 60°, and 75°. The angle of each oblique manhole can be applied within the range of ±7.5°.

3. Divided by the load bearing capacity of the manhole overlying
According to the load bearing capacity of the manhole overlying, it can be divided into two types: steam-20 grade and steam-10 grade.

Packaging Details
Under normal circumstances, we will use PE wrapping film for part of the product, then use wooden case packaging, or according to the special requirements of the customer packaging;If exported to European countries, we will fumigate the wooden cases.
Shipping Details
Under normal circumstances, we will use trucks to transport products to Qingdao port;Or according to customer requirements, choose the most convenient, the most economic mode of transportation.

FAQ
Q :What about your factory?
A :Our factory is located in Wenzhou city ,Zhejiang Province and have more than 15 years experience on machinery making.
Q :How long the warranty will be?
A :We provide 1 years warranty for the machine running ,but we will afford whole -life service for the machine .
Q :Which kind payment do your company do now ?
A :We accept Western Union, T/T ,D/P,D/C and irrevocable L/C payable etc.
Q :Do you supply installation equipment in oversea?
A :Yes, if need, we can send our engineer to your plant to help you do installation and commission.
Q :How can we know the order production status ?
A :We will arrange the person to take photo or video during manufacturing in every week to make you to know the production status.When goods are finished,we will take detailed photos or video for your checking ,after approve ,then we will arrange shipment .also you can arrange FAT in our plant when the goods is ready here.
Q :how about your company after-sale serivce ?
A :1. We provide long-term after-sale service.
2. we can do installation and commission for the equipment in your plant if necessary .
3. Meanwhile, you can call or e-mail us to consult on any relevant question since we have a special line for after-sale service. Alternatively, you can communicate on-line with us to solve any problem.

Forward

Related products