Complaint
| 1 | 19 inch 2U standard chassis, user can choose desktop or rack type |
| 2 | Constant voltage and constant current function |
| 3 | Low ripple and high stability |
| 4 | Continuous adjustable output voltage and current |
| 5 | Digital adjustment of encoder to make the adjustment more precise |
| 6 | Adopting PSFB-ZVS switching mode with high conversion efficiency |
| 7 | Over-voltage, Overheat and Over-voltage Protection of Electric Power Input |
| 8 | LAN and RS485/RS422 communication interface |
| 9 | MODBUS-RTU Standard Communication Protocol |
| 10 | Monitoring by computer software |
| 11 | Parameters can be calibrated by software |
| 12 | Local and Program Controlled Dual Operation Mode |
| 13 | Output rated power 600W or 1200W |
| 14 | Various models of rated voltage 1000V~12KV and rated current 0.1A-1.2A are available. |
| Front Panel |
| 1 | Power Open Switch | |||
| 2 | Key Function Analysis | FINE-Voltage and Current Rough and Fine Adjustment Selection Key; | ||
| LIMI-Voltage and Current Preset Display Key; | ||||
| OVP-SET-Over-voltage Setting Value Key; | ||||
| LOCK-Power panel lock button; | ||||
| REM-Programmable disconnection and long press address setting button; | ||||
| OUT-power output control button; | ||||
| 3 | Analysis of State Indicator | FINE -Voltage and Current Fine Selection Indicator Light for Fine Adjustment; | ||
| LIMIT -Voltage and Current Preset Display Indicator, turn on as preset value; | ||||
| OVP-SET-Over-voltage setting indicator light to display the over-voltage setting value; | ||||
| ACF-Input over-voltage indicator light, turn on input over-voltage; | ||||
| OTP-Temperature Protection Indicator Light for Internal Temperature Protection of Power Supply; | ||||
| OVP - Over-voltage Indicator, turn on the power output over-voltage; | ||||
| LOCK - Power Lock Indicator light, power is locked; | ||||
| REM - Programmable Indicator Light, which is programmed for power supply; | ||||
| OUT - Output status indicator, turn on for power supply; | ||||
| CV - constant voltage indicator lamp, power supply is in constant voltage state; | ||||
| 4 | Adjustment area | V-SET - Output Voltage Knob; | ||
| I-SET - Output Constant Current Knob. | ||||
| 5 | Output voltage measurement terminal | Red - output positive; black - output negative. (The power supply in this series is not connected internally and can not be used.High voltage power supply no this interface) | ||
| 6 | Digital display | Including voltage display area and current display area. | ||
| Back Panel | ||||
| 1 | RS-485/RS-422 Communication Interface | LAN Communication Interface | ||
| 2 | Output Terminal | Cooling window | ||
| 3 | AC NPUT PORT | |||
| TECHNICAL SPECIFICATIONS | ||||
| Model | IPS-ATDP10000-0.12 | |||
Rated value | Voltage(Empty Load) | 800~10000VDC | ||
| Current | 0~0.12A | |||
| Over-voltage protection | 0~11000V | |||
Setting resolution | Over-Voltage | 0.1V | ||
| Voltage | 0.1V | |||
| Current | 0.1mA | |||
| Display resolution | Voltage | 0.1V | ||
| Current | 0.1mA | |||
Display Value Accuracy | Voltage | ≤0.1%+2LSB | ||
| Current | ≤0.5%+2LSB | |||
| Load regulation rate | Voltage | ≤0.5%+2LSB | ||
| Current | ≤1%+2LSB | |||
Power regulation rate | Voltage | ≤0.5%+2LSB | ||
| Current | ≤1%+2LSB | |||
| Ripple (RMS) | Voltage | ≤1‰ | ||
| Size(MM) | 520L*482W*88H | |||
| ENVIRONMENTAL PARAMETERS | ||||
| 1 | AC INPUT | 220VAC (+10% 47Hz-63Hz) | ||
| 2 | Heat dissipation mode | forced heat dissipation by fan | ||
| 3 | Operating ambient temperature | 0-40 C | ||
| 4 | Storage ambient temperature | -20-70 C | ||
| 5 | Maximum ambient humidity for indoor use design | 95% | ||
| 1200W Series | |||||||
| #22 | IPS-ATDP6-200 | 220VAC +10% | 6V-200A | 1200W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
| #23 | IPS-ATDP12-100 | 220VAC +10% | 12V-100A | 1200W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
| #24 | IPS-ATDP15-80 | 220VAC +10% | 15V-80A | 1200W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
| #25 | IPS-ATDP20-60 | 220VAC +10% | 20V-60A | 1200W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
| #26 | IPS-ATDP30-40 | 220VAC +10% | 30V-40A | 1200W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
| #27 | IPS-ATDP40-30 | 220VAC +10% | 40V-30A | 1200W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
| #28 | IPS-ATDP60-20 | 220VAC +10% | 60V-20A | 1200W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
| #29 | IPS-ATDP100-12 | 220VAC +10% | 100V-12A | 1200W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
| #30 | IPS-ATDP150-8 | 220VAC +10% | 150V-8A | 1200W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
| #31 | IPS-ATDP200-6 | 220VAC +10% | 200V-6A | 1200W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
| #32 | IPS-ATDP300-4 | 220VAC +10% | 300V-4A | 1200W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
| #33 | IPS-ATDP400-3 | 220VAC +10% | 400V-3A | 1200W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
| #34 | IPS-ATDP600-2 | 220VAC +10% | 600V-2A | 1200W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
| #35 | IPS-ATDP1200-1 | 220VAC +10% | 1200V-1000mA | 1200W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
| #36 | IPS-ATDP1500-0.8 | 220VAC +10% | 1500V-800mA | 1200W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
| #37 | IPS-ATDP2000-0.6 | 220VAC +10% | 2000V-600mA | 1200W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
| #38 | IPS-ATDP3000-0.4 | 220VAC +10% | 3000V-400mA | 1200W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
| #39 | IPS-ATDP4000-0.3 | 220VAC +10% | 4000V-300mA | 1200W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
| #40 | IPS-ATDP5000-0.24 | 220VAC +10% | 5000V-240mA | 1200W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
| #41 | IPS-ATDP6000-0.2 | 220VAC +10% | 6000V-200mA | 1200W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
| #42 | IPS-ATDP8000-0.15 | 220VAC +10% | 8000V-150mA | 1200W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
| #43 | IPS-ATDP10000-0.12 | 220VAC +10% | 10000V-120mA | 1200W | LAN & RS485/RS422 | 520L*482W*88H | 16KG/17KG |
