Sterility Testing Isolators provide isolation of a sample or process while providing the conditions required for a sterile/aseptic environment. Its operation is configured to be either positive or negative pressure. The equipment provides personnel and sample protection, while protecting the work area and surrounding environment. The system operates with circulating or unidirectional air flow.
Application
·Drug preparation
·Biosafety laboratories at BSL3 and BSL4 levels
·Sterility test
·Treatment of strong materials
·Cell Processing
·Aseptic processing
·Research and development
Features
·Provides an operator exposure level (OEL) of less than 1 μg/m3 during operation.
·The inside of the cavity can be cleaned manually, and there is no dead angle around.
·High-efficiency and energy-saving variable frequency fans are used to adapt to different working modes.
·Dry vaporized hydrogen peroxide disinfection mode, reaching 6-log spore killing level.
·Can be integrated to install online dust particles and floating bacteria sampling system.
·With automatic and semi-automatic pressure holding test.
·Can preset two working modes of positive pressure and negative pressure.
·The control system meets FDA 21CFR part11 electronic signature and electronic record requirements.
·After ventilation, the cavity can meet the concentration of <1ppm, with concentration sensor detection.
Cabin material | SUS316L stainless steel |
Cleanliness | Class 100 ISO5 classA |
filter level | HEPA≥99.995%,@0.3um |
Operation cabin decontamination time | 2.5h |
VHP sterilization effect | Kills up to 6 logs against Bacillus stearothermophilus |
Dimensions (L*W*H) | (non-standard can be customized) |
Illumination | >500lx |
power supply | 380V 50Hz |
differential pressure | 20~80Pa adjustable |