No. | Project | Requirements | Note |
1 | Environment temperature | 5ºC~40ºC | |
2 | Relative humidity | ≤ 60% | |
3 | Altitude | ≤ 1000 m | |
4 | Noise | ≤ 85 dB | |
5 | Ventilation | Well. No contain acid, alkali or other corrosion gas. | Do not apply to the explosive environment |
6 | Working area | No bad vibration | |
7 | Lighting | good | |
8 | Air supply | 0.6~0.8 MPa |
Control Mode | Industry Bus | Torque measuring method | Cantilever |
Mains connection | 3×380V,50Hz +N +PE | Torque Range | 0 ~ 190 or 240 or 320 Nm |
Docking mode | Electromagnetic lock | Torque Accuracy | 0.1% F.S |
Fixing Mode | Movable | Static Measurement Accuracy of Temp | 0.1ºC |
Power of Motor (Schneider) | 5.0 kW | Dynamic Measurement Accuracy of Temp | +0.5ºC |
Motor Speed | 3000 r/min | Melt pressure Range | 0.1 ~ 100 Mpa |
Reducer(Neugart) | 1:12or 1:15 or 1:20 | Melt pressure Accuracy | 0.5% F.S |
Speed Range | 0.1 ~ 250 or 200 or 150 r/min | Speed Accuracy | 0 .05% F.S |
PC operating System | Window 10 | Application Software | Hapro Control software |
Weight | 250 kg | Mixer report software | |
Dimension (L×W×H) | 950×600×1200 mm | Extruder report software | |
Viscosity software |
Photograph | Performance Index | Performance Parameter |
Screw L:D | 25:1 | |
Screw Diameter | 20 mm | |
Barrel Diameter | 50 mm | |
Compression Ratio | 2.4:1 | |
Screw material | 38 CrMoAlA | |
Temp control system | RKC from Japan | |
Temp sensor | J type thermocouple | |
Heating | Electrical Heating/4 Zones | |
Heating power | 3.0 kW | |
Max. Temperature | 350ºC | |
Feeding speed | Screw metering feed | |
Cooling | Air Compression | |
Pressure range | 0~100 Mpa | |
Output | Granular 0.8 -10 kg/ hour Powder 0.45 -11 kg/ h | |
Dies head | Slit die (1.5mm deep x 60mm wide) | |
Capillary Die (1.5mm deep x 20mm wide x 160mm length) | ||
Weight | 250 kg | |
Dimension (L×W×H) | 900×570×1250 mm |
Photograph | Performance Index | Performance Parameter |
Flat die | 60×1.5 mm Customizable | |
Power of die heating | 1.2 kW | |
Film thickness | 0.5-1.0 mm | |
Max. film width | 50mm | |
Roller Speed | 0-140mm/s | |
Diameter of roller | 110mm | |
Roller width | 190 mm | |
Distance between rollers | 0-2.5mm adjustable | |
Crimp Ways | Tension adjustment | |
Power of Pull Motor | 550w | |
Power of Crimp Motor | 370w | |
Total power | 1.0 kW | |
Cooling | Water | |
Mains connection | 3×380V,50/60 Hz ,+N +PE | |
Weight | 100 kg | |
Dimension (L×W×H) | 1400×650×1300 mm |