Complaint
| Diameter (mm) | Working Length (mm) | Segment Dimension (mm) | |||
| L | W | H | Segment Quantity (pcs) | ||
| 6 | 30, 50 | column | 10 | 1 | |
| 8 | 40 | column | 10 | 1 | |
| 10 | 40 | column | 10 | 1 | |
| 12 | 40 | column | 10 | 1 | |
| 14 | 40 | column | 10 | 1 | |
| 16 | 40 | column | 10 | 1 | |
| 18 | 60 | column | 10 | 1 | |
| 20 | 40-100mm | ring | 3.0 | 10 | 1 |
| 26 | ring | 3.0 | 10 | 1 | |
| 32 | ring | 3.0 | 10 | 1 | |
| 36 | ring | 3.0 | 10 | 1 | |
| 42 | 23/19.7 | 3.0 | 10 | 4 | |
| 52 | 23/20 | 3.5 | 10 | 5 | |
| 62 | 24 | 3.5 | 10 | 5 | |
| 82 | 24 | 4.0 | 10 | 7 | |
| 102 | 24 | 4.0 | 10 | 9 | |
| 112 | 24 | 4.0 | 10 | 9 | |
| 132 | 24 | 4.0 | 10 | 10 | |
| 152 | 24 | 4.0 | 10 | 12 | |
| 178 | 24 | 4.5 | 10 | 13 | |
| Diameter(Inch/mm) | Segment Height(mm) | Total Length(mm) | Connection |
|---|---|---|---|
| 1/4"/6.3 | 10mm | 60(working 35mm) | shank/M14/5-8"-11/G/1/2" |
| 3/8"/9.5 | 10mm | 60(working 35mm) | shank/M14/5-8"-11/G/1/2" |
| 1/2"/12.7 | 10mm | 60(working 35mm) | shank/M14/5-8"-11/G/1/2" |
| 5/8"/15.9 | 10mm | 60(working 35mm) | shank/M14/5-8"-11/G/1/2" |
| 3/4"/19.0 | 10mm | 60(working 35mm) | shank/M14/5-8"-11/G/1/2" |
| 1"/25.0 | 15 | 60-62 | shank/M14/5-8"-11/G/1/2" |
| 1-1/8"/29.0 | 15 | 60-62 | shank/M14/5-8"-11/G/1/2" |
| 1-1/4"/32.0 | 15 | 60-62 | shank/M14/5-8"-11/G/1/2" |
| 1-3/8"/35.0 | 15 | 60-62 | shank/M14/5-8"-11/G/1/2" |
| 1-1/2"/38.0 | 15 | 60-62 | shank/M14/5-8"-11/G/1/2" |
| 1-5/8"/41.0 | 15 | 60-62 | shank/M14/5-8"-11/G/1/2" |
| 1-3/4"/45.0 | 15 | 60-62 | shank/M14/5-8"-11/G/1/2" |
| 2"/51.0 | 15 | 60-62 | shank/M14/5-8"-11/G/1/2" |
| 2-1/4"/57.0 | 15 | 60-62 | shank/M14/5-8"-11/G/1/2" |
| 2-1/2"/63.0 | 15 | 60-62 | shank/M14/5-8"-11/G/1/2" |
| 2-3/4"/70.0 | 15 | 60-62 | shank/M14/5-8"-11/G/1/2" |
| 3"/76.0 | 15 | 60-62 | shank/M14/5-8"-11/G/1/2" |
| 3-1/2"/90.0 | 15 | 60-62 | shank/M14/5-8"-11/G/1/2" |
| 4"/100 | 15 | 60-62 | shank/M14/5-8"-11/G/1/2" |
Electroplated diamond core bits
1. when for drilling, first locate at a 45 degree angle, and then slowly turn to the right to drill in (to prevent slipping).
2. When for the hole opener, add water while drilling for cooling to increase the life and prevent the product from breaking.
3. It can be used for various drilling machine; do not use the impact stop of electric drills to drill holes.
4. It is used for drilling hard materials such as stone, glass, concrete, etc. The service life of dry drilling is shorter than that of adding water.
| Diameter | Total length | Working length | Diamond width | Shank | Grit |
| 22mm | 85mm | 60mm | 5mm | Round | #60/70 |
| 25mm | 85mm | 60mm | 5mm | Round | #60/70 |
| 28mm | 85mm | 60mm | 5mm | Round | #60/70 |
| 30mm | 85mm | 60mm | 5mm | Round | #60/70 |
| 32mm | 85mm | 60mm | 5mm | Round | #60/70 |
| 35mm | 85mm | 60mm | 5mm | Round | #60/70 |
| 38mm | 85mm | 60mm | 5mm | Round | #60/70 |
| 40mm | 85mm | 60mm | 5mm | Round | #60/70 |
| 43mm | 85mm | 60mm | 5mm | Round | #60/70 |
| 45mm | 85mm | 60mm | 5mm | Round | #60/70 |
| 50mm | 85mm | 60mm | 5mm | Round | #60/70 |
| 55mm | 85mm | 60mm | 5mm | Round | #60/70 |
| 60mm | 85mm | 60mm | 5mm | Round | #60/70 |
| 65mm | 85mm | 60mm | 5mm | Round | #60/70 |
| 70mm | 85mm | 60mm | 5mm | Round | #60/70 |
| 75mm | 85mm | 60mm | 5mm | Round | #60/70 |
Other specifications on request available.
