Description
High precision CNC automatic ring die vertical grinding machineIt's suitable for new ring die and flat die mold fine grinding.Used ring die repairing.
Technical description1.The industry preferred,original models.
2.Wheel angle ±8 degrees adjustable.
3.Safety,simple,user-friendly operation.
4.Ring-die grinding can meet more than 80% of the market needs.
5.Parameter input,automatic modification,only need to choose the programming,it can efficient grinding.
6.Composite processing function:can be done within the circle,the outer circle,end face grinding.
7.Ring die dedicated system MLT-T208i with mature hardware and software systems,use-friendly,intutive interface,stable performance,no programming,the relevant parameter of the ring die through the CNC system interface can be filled.
8.MLT series of motors,with anti-oil,engage in corrosion and so on.
Parameter description| Maximal outer diameter of ring die | 15000mm |
| Minimum inner diameter of ring die | 350mm |
| Maximal width of ring die | 550mm |
| Maximal weight of ring die | 1200kg |
| Inside of ring die grinding | support |
| Outside of ring die grinding | support |
| End fave of ring die grinding | support |
| Grinding wheel dressing | automatic/manual operation |
| Grinding wheel type | plate-wheel/bowl wheel |
| Cooling system | circulating water cooling |
| Grinding wheel spindle motor | 4.0kw |
| Grinding wheel speed range | 1000-4000r/min |
| Working table motor | 5.5kw |
| Working table speed | 1-60r/min |
| The maximal weight of table | 800kg |
| Working table diameter | 1200mm |
| NC control system | MLT-T208i |
| Number of control shaft | X/Z axis,two axises linkage |
| Servo drive | AC servo driver and motor |
| Electric cabinet air conditioning | DLW5 |
| Major electrical component | Schneider |
| The inverter | Mitsubishi |
| Terminal | Phoenix |
| Power supply voltage and frequency | AC380 3P 50-60HZ |
| The rated power of the whole machine | 11kw |
| Floor space | 2940mmx2460mmx2920mm |
| Host weight | 8500kg |
Complaint
