Complaint
Cisco 4431 Integrated Services Router, which supports 3 Network Interface Modules (NIM) slots, delivers 500 Mbps to 1 Gbps aggregate throughput. This router also supports two kinds of DDRM, data plane and control/services plane, which make administrator easy to manage the router..
Figure 1 shows the appearance of Cisco ISR4431/K9:
Table 1 shows the Quick Specs:
Product Code | Cisco ISR4431/K9 |
Aggregate Throughput | 500 Mbps to 1 Gbps |
Total onboard WAN or LAN 10/100/1000 ports | 4 |
RJ-45-based ports | 4 |
SFP-based ports | 4 |
Enhanced service-module (SM-X) slot | 0 |
NIM (Network Interface Modules) slots | 3 |
Onboard ISC slot | 1 |
DDRM (data plane) | 2 GB (default) / 2 GB (maximum) |
DDRM (control/services plane) | 4 GB (default) / 16 GB (maximum) |
Flash Memory | 8 GB (default) / 32 GB (maximum) |
Power-supply options | Internal: AC, DC, and PoE |
Rack height | 1 RU |
Dimensions (H x W x D) | 43.9 x 438.15 x 507.2 mm |
Package Weight | 20.88 Kg |
Figure 2 shows the front panel of Cisco ISR4431/K9
Note
1 | Power supply unit | 3 | Router power On/Off switch |
2 | LEDs | 4 | Optional power supply unit |
LEDs | Represents | Color | Description |
PSU | Power Supply Unit (P0 and P1) Status | Green | PSU is on and is providing power. |
Amber | PSU is on but with errors or in a failure condition. | ||
Off | Power supply is turned off. | ||
GE POE | Internal PoE Daughter Card Status | Green | PSU is installed and providing power |
Amber | PSU is installed but in a failure condition. | ||
Off | PSU is off. | ||
FLASH | System Flash Status | Blinking Green | Compact flash/eUSB flash is present and currently being accessed. |
TEMP | Temperature Status | Solid green | All temperature sensors in the system are within acceptable range. |
Amber | One or more temperature sensors in the system are outside the acceptable range. | ||
Off | Temperature is not being monitored. | ||
PWR | System Power | Green | System power is on and functioning correctly. |
Green blinking | System power is in the process of shutting down. | ||
Amber | System power is up, but low level initialization failed. | ||
Amber blinking | System power is up, but the system failed to come out of reset. | ||
Off | System power is off. | ||
POE BOOST | Power Over Ethernet Boost Mode | Green | Two PoE power supplies are installed and operating in boost mode. |
Off | This can mean one of the following: ·No PoE PSU installed. ·One PoE PSU installed. ·Two PoE PSUs installed and operating in redundant mode. | ||
ISC | ISC Slot Status | Green | PVDM4 is present and enabled. |
Amber | Initialized with error. | ||
Off | Not present. | ||
FAN | Fan Status | Green | All fans are operating. |
Amber | One fan has stopped working. | ||
Blinking Amber | Two or more fans have stopped working, or the fan tray has been removed. | ||
Off | Fans are not being monitored. | ||
STAT | System Status | Solid green | System operating normally. |
Blinking amber | BIOS/Rommon is booting. | ||
Amber | BIOS/Rommon has completed booting, and system is at Rommon prompt or booting platform software. | ||
Off | System is not out of reset or BIOS image is not loadable. |
1 | GE management port | 5 | Console port |
2 | Auxiliary port | 6 | GE Ports |
3 | USB Type A port | 7 | NIM Slots |
4 | USB Type B mini port |
·The NIMs support 2 single-wide or 1 double-wide.
·The GE Ports include 4 RJ45 ports and 4 SFP ports
Cisco ISR4431/K9 is one of the Cisco 4000 series routers, which support new modules & cards slots, such as NIM, ISC, etc. Besides, Cisco ISR4431/K9 can upgrade by licenses.
Table 3 shows some recommended modules, cards, licenses and several cables:
Items | Models | Descriptions |
Console and Auxillary Cables | CAB-AUX-RJ45 | Cisco CAB-AUX-RJ45 Auxiliary Cable 8ft with RJ45 and DB25M |
CAB-ETH-S-RJ45 | Cisco Router Cable CAB-ETH-S-RJ45 | |
CAB-CONSOLE-RJ45 | Cisco CAB-CONSOLE-RJ45 Console Cable 6ft with RJ45 and DB9F | |
CAB-CONSOLE-USB | Cisco CAB-CONSOLE-USB Console Cable 6 ft with USB Type A and mini-B | |
Licenses | L-SL-44-APP-K9= | Cisco ISR 4431/4451 AppX license L-SL-44-APP-K9= with WAAS/vWAAS 1300/2500 conns RTU |
Network Interface Modules | NIM-1MFT-T1/E1 | Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module |
NIM-2CE1T1-PRI | Cisco Multiflex Trunk Voice and WAN network interface module | |
NIM-4E/M | Analog voice network interface card (ear and mouth) | |
NIM-2FXS | Cisco Analog voice network interface card NIM-2FXS | |
NIM-2FXS/4FXO | Cisco Analog voice network interface card NIM-2FXS/4FXO | |
NIM-8MFT-T1/E1 | Cisco Fourth-Generation Multiflex Trunk Voice and WAN network interface module | |
SFPs for On-Board GE Ports | GLC-SX-MMD | Cisco GLC-SX-MMD 1000BASE-SX SFP transceiver module, MMF, 850nm, DOM |
GLC-LH-SMD | Cisco GLC-LH-SMD 1000BASE-LX/LH SFP transceiver module, MMF/SMF, 1310nm, DOM | |
GLC-ZX-SMD | Cisco GLC-ZX-SMD 1000BASE-ZX SFP transceiver module, SMF, 1550nm, DOM |
Technical Specifications | ISR4461/K9 | ISR4451-X/K9 | ISR4431/K9 | ISR4351/K9 | ISR4331/K9 | ISR4321/K9 | ISR4221/K9 |
Aggregate Throughput | 1.5Gbps | 1 Gbps to 2 Gbps | 500 Mbps to 1 Gbps | 200 Mbps to 400 Mbps | 100 Mbps to 300 Mbps | 50 Mbps to 100 Mbps | 35 Mbps to 75 Mbps |
Total onboard WAN or LAN 10/100/1000 ports | 4 | 4 | 4 | 3 | 3 | 2 | 2 |
RJ-45-based ports | 4 | 4 | 4 | 3 | 2 | 2 | 2 |
SFP-based ports | 4 | 4 | 4 | 3 | 2 | 1 | 1 |
Enhanced service-module slots | 3 | 2 | 0 | 2 | 1 | 0 | 0 |
Doublewide service-module slots | 2 | 1 (assumes no singlewide SM-X modules installed) | 0 | 1 (assumes no singlewide SM-X modules installed) | 0 | 0 | 0 |
NIM slots | 3 | 3 | 3 | 3 | 2 | 2 | 2 |
OIR (all I/O modules) | Yes | Yes | Yes | Yes | Yes | Yes | No |
Onboard ISC slot | 1 | 1 | 1 | 1 | 1 | 1 | No |
Aggregate Throughput | 500Mbps to 1Gbps |
Total onboard WAN or LAN 10/100/1000 ports | 4 |
RJ-45-based ports | 4 |
SFP-based ports | 4 |
Enhanced service-module slots | 0 |
Doublewide service-module slots | 0 |
NIM slots | 3 |
OIR (all I/O modules) | Yes |
Onboard ISC slot | 1 |
Default memory double-data-rate 3 (DDR3) error-correction-code (ECC) DRAM (Combined control/services/data planes) | NA |
Maximum memory DDR3 ECC DRAM (Combined control/services/data planes) | NA |
Default memory DDR3 ECC DRAM (data plane) | 2 GB |
Maximum memory DDR3 ECC DRAM (data plane) | 2 GB |
Default memory DDR3 ECC DRAM (control/services plane) | 4 GB |
Maximum memory DDR3 ECC DRAM (control/services plane) | 16 GB |
Default flash memory | 8 GB |
Maximum flash memory | 32 GB |
External USB 2.0 slots (type A) | 2 |
USB console port -type B mini (up to 115.2 kbps) | 1 |
Serial console port - RJ45 (up to 115.2 kbps) | 1 |
Serial auxiliary port - RJ45 (up to 115.2 kbps) | 1 |
Power-supply options | Internal: AC, DC, and PoE |
Redundant power supply | Internal: AC, DC, and PoE |
AC input voltage | 100 to 240 VAC autoranging |
AC input frequency | 47 to 63 Hz |
AC input current range, AC power supply (maximum) | 3 to 1.3A |
AC input surge current | 60 A peak and less than 5 Arms per half cycle |
Typical power (no modules) (watts) | 65 |
Maximum power with AC power supply (watts) | 250 (no PoE) |
Maximum power with PoE power supply (platform only) (watts) | 500 with PoE redundant |
Maximum endpoint PoE power available from PoE power supply (watts) | 250 W with optional redundancy |
