Food Grade Platinum Cure Translucent AB Liquid Mold Silicone

Min.Order: 200

Product origin: Shenzhen, Guangdong, China

Infringement complaint:

Complaint

US$ 6.59 ~ 9.39

Description

Mold Making Silicone

INI-E615

Description
Two-component silicone, platinum-curing/ addition-cure type, flowable, vulcanizes at room temperature or heated temperature.
Can be used for a long time in the temperature range of - 65 ° C - 200 ° C and keep its soft and elastic properties.

Application
- Suitable for molding variety of products in large quantity, such us art crafts, furniture, architectural elements, garden ornaments, shoe, tire, soap, candle, vacuum bagging, wind turbine blades, ship/boat hulls, aircraft hulls, FRP pipes/profiles, beacon lighthouse covers, military industry, aviation and other fields etc.
- Suitable for materials such as resin, PU, PVC, polyester, gypsum/plaster, wax etc.

Features & Advantages

Food grade, FDA
Low shrinkage
Low viscosity
Anti-deformation

High temperature resistance
Not oily
No bubbles

Excellent flow leveling which will copy finest details and patterns from exquisite products.

Durable with excellent tear and tensile strength, guarantee molding times
Easily demolding
Resist aging, acid, alkali, corrosion and weather aging

Typical properties INI-E615

Properties Index		Test Report
Before Curing	Appearance	Translucent fluid
Before Curing	Viscosity(cps)	1900±500 (Adjustable)
Operating	Mixing Ratio (By weight)	1 :1 or 10 :1
	Operating Time(25ºC /min)	30~50 (Adjustable)
	Curing time (hr, basically cured)	3~5 (Adjustable)
	Curing time (hr, perfectly cured)	12
After Curing	Hardness (shore A)	15±2
	Tear strength (kN/m)	22±3
	Tensile strength (Mpa)	5±0.5
	Shrinkage (%)	≤0.1
	Elongation (%)	460~560
	Density (g/cm)	1.02

Notes: Above data are only reference values, actual data is floating and adjustable.

Operation instructions

Mix part A and pars B evenly with 1:1 mixing ratio.

Notes: 1) Weigh the two parts exactly by electronic weight. For example, the operation time will be shorten after adding too much catalyst.

Mix part A and part B evenly. Otherwise the silicon rubber will be partly solidified which will make the finished molds meet a short life and waste silicon rubber.

2. Vacuum pumping

Notes: 1) This step is not have to have, but it is best if there is one. It will discharge all air in the mixture successfully, so as to ensure that there
will be no bubbles in the finished mold.

2) This step is less than 10 minutes. Otherwise, it
Will cause cross-linking reaction, and no more
further steps will be available.

Pouring casting

Notes: We suggest to set the mold for another 12 hours after demould before put it into large production.

Handing and Storage

Precautions for safe handling:

Protective measures: Training should be provided to anyone working with or near this material. Training should cover potential health effects and proper handling techniques. Avoid contact with eyes, skin and clothing. Avoid ingestion and inhalation.

Measures to prevent fire: Ensure good local exhaust ventilation. Keep container away from any sources of ignition or heat (e.g. open flames, hot surfaces). The work area should be equipped with the corresponding species and quantity of emergency equipment, spills emergency treatment equipment and appropriate storage material.

Measures to prevent aerosol and dust generation: Ensure good local exhaust ventilation.

Measure to protect the environment: Do not allow this products to be released to the environment without proper treatment.

Advice on general occupational hygiene: Eating, drinking and smoking should be prohibited in areas where this material is handled, stored and processed.

Conditions for safe storage, including any incompatibilities:

Technical measures and storage conditions: Store in a cool, dry, well-ventilated area away from
incompatible substances, feedstuffs, beverages and foods. Keep away from heat, sparks and flame. Treat carefully, avoid physical damage to containers. The storage area should be equipped with the corresponding species and quantity of emergency equipment, spills emergency treatment equipment and appropriate storage material.

Requirements for storage rooms and vessels: Keep container tightly sealed.

Package
5KG, 20KG, 25KG and 200KG per drum.
(There are metal drum and plastic drum for your choice for 5KG and 20KG)

Shelf life
Twelve(12) months when stored under dry and cool place by original package under 25ºC.

For silicone requirements, please contact Mr JoeWhatsapp

Forward

Related products