Complaint
The non-woven geotextile is made of filament or short fiber laid into a network through different equipment and processes. After needle punched and other processes, different fibers are interwoven and intertwined to make the fabric standardized,soft, full, thick and hard, so as to meet the requirements of different thickness.
The non-woven geotextile has good fabric gap and good adhesion Due to the softness of the fiber, it has certain tear resistance, good deformation adaptability, and good plane drainage capacity. The surface is soft and multi gap, and has a good friction coefficient, which can increase the adhesion capacity of soil particles, prevent the loss of particles by preventing the loss of particles, and eliminate the excess water. The surface is soft and has good protection ability. According to the length of filament, it can be divided into filament non-woven geotextile or short filament non-woven geotextile. They can play a very good filtration, isolation, reinforcement, protection and other effects, is a widely used geosynthetics. The tensile strength of filament is higher than that of staple, so it can be used according to specific requirements.
Product Name: | High Quality Polyester Non Woven Geotextile Polypropylene Nonwoven Geotextile |
Weight: | 100-1500g/sqm |
Length: | 50-300m or follow customers' request |
Width: | 1-7m or follow customers' demand |
Color: | White, Black, Green |
Material: | 100% Polyester or 100% Polypropylene |
Standard: | ASTM GRI-GM13/M17/China standard |
Application | 1.Water conservancy project and hydropower project 2.Road paving, railway 3.Airport and port 4.River bank protection and tunnel 5.Environmental protection, etc |
Packing | Black PE bag or white fabric bag outside and paper pipe inside |
Q1: Are you a factory or trading company? Where is your company located?
A1: We are a manufacturer/factory. Our company is located in Shandong, China.
