Complaint
Carbon cup with tellurium for iron casting
Thermal analysis cup with tellurium reliable data for thermal analysis to read CE, C & Si of cast iron. The high-precision carbon cup series is designed with reasonable sample cups and high-precision thermocouples. Carbon cups are widely used for on-site testing and control of molten iron components due to their speed, simplicity, reliability, and low cost. After the molten iron is poured into the cup, the molten iron will gradually solidify over time, perform thermal analysis according to the temperature of its cooling curve, and measure and calculate CEL, C, Si, and other components.
Technical Data:
Product Name: Carbon cup with tellurium for iron casting
Temperature Range: 1250ºC~1370ºC
Measuring Range:
CEL: 3.2%~4.8%±0.05%
C%: 2.8%~4.2%±0.05%
Si%: 0.9%~3.0%±0.1%
Shape: round and square
Measurement function: thermal analysis for cast iron
Measuring time: 240 seconds at most
Indication in the working process: the carbon cup is connected with three signal indicators on the panel of "Ready", "Measurement" and "Finish" through the potential free-reed relay.
| Product Name: | Carbon cup | Temperature Range: | 1250ºC~1370ºC |
| Carbon Equivalent: | 3.2%~4.8%±0.05% | Carbon Content: | 2.3%~4.2%±0.05% |
| Silicon Content: | 0.6%~3.8%±0.1% | Type: | Round And Square Type |
| Measurement function: | Thermal analysis towards cast iron | Measuring time: | 240 seconds at most |
| Specification | Measurement Functions |
| SF00/S | Determine carbon equivalent (CEL) and undercooling |
| SF01/S | Determine carbon equivalent (CEL), carbon and silicon content |
| SF02/S | Determine CE, C & Si after spheroidization |
| SF01/R | Determine carbon equivalent (CEL), carbon and silicon content |
Q: Are you Factory?
A: Definitely, we are a factory. Welcome to visit us!
Q: What Parameters should I provide to you for a proper quotation?
A: Application, pore size, dimension, color, quantity, packing requirements, trade terms.
Q: How can you control your quality?
A: For each production processing, we have a complete QC system for the chemical composition and physical properties. After production, all the goods will be tested, and we have the quality certificates with ISO9001.
Q: What is your lead time?
It usually needs about 15- 20 days after receiving the PO.
Q: Do you provide Samples?
A: Yes, our factory provides samples for testing, pls send detailed parameters to us. (if customized, withdrawing is best) The samples will be charged or free according to the specific requirements.
Q: What are the Payment Terms?
A: We accept T/T, L/C, West Union, etc.
Q: How can I get samples?
A: We are honored to offer you the samples.
Q: What about your Packing?
A: We provide carton boxes, pallets, etc. OEM packing is available too.
Q: Do you have R&D services?
A: Yes, we have an R&D department to assist you in new product development.
Q: Does your company accept customization?
A: We accept OEM service.
Q: Can we visit your company?
A: Yes, for sure, you are welcome to visit our company.
