PET Resin is cream or pale-yellow crystal, with smooth and shiny surface. Resistance to creep deformation, fatigue resistance, abrasion resistance and dimensional stability are perfect. Small wear and tear but high hardness, its toughness is the largest in thermoplastic. The electrical insulation of PET is perfect and little be affected by temperature, however, poor corona resistance. PET is non-toxic, weather resistance, and anti-chemical stability is very good. PET is low water absorption, resistance to weak acids and organic solvents. Intolerance of hot water immersion and alkali.
Feature:
1.Oil resistant, fat resistant, acid resistant, alkali resistant, resistant to most solvents.
2.Excellent resistance performance of high and low temperature.
3.Non-toxic, tasteless, health and safety.
4.Transparent, UV blocking, good glossiness
| Unit | Grade 1 | Grade 2 | Grade 3 |
I.V. | dL/g | 0.800 ± 0.020 | 0.840 ± 0.020 | 0.860 ± 0.020 |
DEG | % | 1.40 ± 0.30 | 1.40 ± 0.30 | 1.10 ± 0.30 |
- COOH | mmol/kg | ≤ 35 | ≤ 35 | ≤ 35 |
AA | ug/g | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 |
Color value , L | / | ≥ 80 | ≥ 80 | ≥ 70 |
Color value , B | / | ≤ 1.0 | ≤ 1.0 | ≤ 1.0 |
Powder | mg/kg | ≤ 100 | ≤ 100 | ≤ 100 |
Melting point | °C | ≥ 245 | ≥ 246 | ≥ 249 |
Density | g/cm3 | 1.40 ± 0.01 | 1.40 ± 0.01 | 1.40 ± 0.01 |
Moisture | % | ≤ 0.2 | ≤ 0.2 | ≤ 0.2 |
Ash | % | ≤ 0.08 | ≤ 0.08 | ≤ 0.08 |
PET IV 0.80 +/- 0.02 - For Water Bottle / PET Sheet
PET IV 0.82 or 0.83 +/- 0.02 - For Edible Oil Bottle
PET IV 0.84 or 0.85 0r 0.86 +/- 0.02 - For CSD Bottles
PET IV 0.76 or 0.78 +/- 0.02 - For Hot Fill Bottle / Water Bottle
Application:
1. Various types of food, medicines, non-toxic sterile packaging materials; Textiles, precision instruments, electrical components, high-grade packaging materials; Tapes, videotapes, film, computer floppy disk, metal coating and the substrate such as photographic film; Electrical insulation materials, capacitor film, flexible printed circuit boards and membrane switch and other electronics and machinery.
2. Package bottle: From the initial development of carbonated beverages to the present beer bottles, cooking oil bottles, condiment bottles, medicine bottles, cosmetic bottles.
3. Electric products: Manufacture of connectors, coil winding tube, integrated circuit case, capacitor, transformer enclosure, TV accessories, tuners, switches, timer cover, auto fuses, motor bracket, and relays.
4. Auto Parts: Such as distribution panels cover, ignition coils, valves, exhaust parts, distributor cap, casing measuring instruments, small electric motor housings, etc., can also be a good use of PET coating, surface gloss and rigidity, making the car exterior parts.
5. Machinery and equipment: Manufacture of gears, cams, pump housing, pulleys, motor frames and watch parts, can be used as the microwave oven baking, a variety of roof, outdoor billboards and models.
6. PET Plastic molding can be injection molding, extrusion, blow molding, coating, bonding, machining, electroplating, plating, vacuum metallization, printing.
1.Packing:
25kg/bag,1100kg/jumbo bag or per your requirement.
22mt/20'FCL
2.Storage:
The resin should be stored in a drafty, dry warehouse and away from fire and direct sunlight. It should not be piled up in the open air.
3.Transportation:
During transportation, the product should not be exposed to strong sunlight or rain and should not be transported together with sand, soil, scrap metal, coal or glass. Transportation together with toxic, corrosive and flammable substance is strictly prohibited.