Complaint
| Main Technical data | |||
| No. | Item | Parameters | |
| 1 | Model | LL-80-22ST | |
| 2 | Suitable material | Galvanized steel & Cold rolled steel sheet | |
| 3 | Thickness | 1.5-3.0mm | |
| 4 | Total Speed | About 20~35 m/min including Punching | |
| 5 | Total power | About 37.5KW | |
| 6 | Cutting Type | Hydraulic,& Servo tracking | |
| 7 | Forming step | 24 steps | |
| 8 | Dia. of shaft | ¢70mm | |
| 9 | Shaft | thermal refining HN250-280 | |
| 10 | Driving method | Commutator drive; Soft coupling output. | |
| 11 | roller | Cr12Mov, Salt bath quenching HR58-62 | |
| 12 | Reducer | K87 series reducer | |
| Main components list -- Whole Line | |||
| No. | Item | Unit | Qty |
| 1 | Decoiler | Set | 1 |
| 2 | Roll Forming machine | Set | 1 |
| 3 | PLC | Set | 1 |
| 4 | Hydraulic station | Set | 1 |
| 5 | Cutting device | Set | 1 |
| 6 | Punching device | Set | 1 |
| 7 | Collector | Set | 1 |
| Production process flow chart: uncoiling → Leveling → pre punching → roll forming → hydraulic&servo tacking cutting → collection |
| Process description |
| The type production line can produce variety of sizes steel through changing punching molds.cutting, all sizes of punching and cutting length are measured directly by the counter, and the size is set arbitrarily in the man-machine interface. |
