Yh-06-500 Special Cleaning Agent for Reverse Osmosis Membrane

Min.Order: 5
Product origin: Qingdao, Shandong, China
Infringement complaint: complaintComplaint
US$ 899 ~ 1200

Description
YH-06-500 special cleaning agent for reverse osmosis membrane


1,Product performance
YH-06-500 reverse osmosis membrane cleaning agent is a high performance compound cleaning solution formula designed for RO membrane to remove metal hydroxide, inorganic scale (carbonate, sulfate and other chemical deposits, etc.) and organic scale (slime, mucus, colloid, algae, etc.) from the surface of RO membrane. This series of products are divided into acid A or alkaline B two organic compound formula products.

2,YH-06-500 product characteristics
1,It is suitable for aromatic polyamide reverse osmosis membrane, hollow fiber membrane and sodium filtration (NF) and ultrafiltration (UF). Excellent cleaning effect can prolong the operation time of the membrane.
2,Low foam formulation. 
3, liquid agents, easy to use.
4, fast cleaning effect, no chemical damage to the membrane.
5,Wide range of applicable PH, good biodegradability.
6,Approved by the European Commission for the Environment as a cleaning agent in the production of drinking water reverse osmosis system.

3,Technical index
 
ProjectsProduct technical specifications
  A  B
Appearance Colorless transparent or light yellow liquid
PH value (original solution)≤2.0≥9.0
Density(20ºC)g/cm3≥1.02≥1.02
Storage temperature lower limit ºC-10-10

Note: This technical index is a conventional physical and chemical index, not as a supply acceptance standard.

4,Use method
1 ,Check the connection cleaning circuit: cleaning box, hose and security filter have been connected, cleaned with demineralized water and rinsed at least 2 times. If necessary, install a new cartridge in the security filter.
2,Inject one-half volume of the cleaning tank with reverse osmosis permeable water or demineralized water, and slowly inject the budgeted reverse osmosis cleaning agent into the cleaning tank and mix well. It is recommended to control the temperature of the cleaning solution at about 30ºC.
3, according to the cleaning circuit, start the cleaning pump, start cleaning, a start out of the RO membrane cleaning solution should be discharged from the system, the volume is about 10-20% of the cleaning tank, cleaning flow, flow rate should be in accordance with the membrane manufacturer or system supplier's recommended value, cleaning time according to the degree of pollution, generally 8-12 hours.
 Please contact with YH chem product representative for specific operation procedure to decide the better dosage and cleaning procedure in specific cases.

5, Packaging and storage
Packed in plastic drums, 25kg per drum, stored in a cool and ventilated place indoors for one year.

6,Safety and protection
It is irritating to the skin, so you should wear protective equipment to prevent splashing in the eyes or on the skin. If splashed in the eyes or on the skin, wash with water immediately.









Product Tag:
Related categories:
Scroll to Top