Factory Direct Sale High quality/High cost performance General Purpose Liquid Silicone Rubber Food Grade Factory Direct Sale

Min.Order: 3
Product origin: Shanghai, China
Infringement complaint: complaintComplaint
US$ 4.34 ~ 4.48

Description

Description:Sanesil LSR6100 A/B is a two-component general purpose liquid silicone rubber designed for producing high clarity, high tear strength parts through injection process after A/B mix with ratio of 1/1.

Special properties:
  • Excellent mold release and easily pigmented, soft skin-like feel when molded
  • Superior clarity, small deformation value
  • High transparency, high strength, good resilience, yellowing resistance, aging resistance
  • Complies with US FDA CFR 21 Part 177.2600 standards
  • Conforms to European EN14350-2, Section 4.9 Volatile Compound Test Standards
  • Meets European ROHS and REACH Standards
  • Pot-life of the mixture of the two components (closed vessel) at 20°C is 5 days
  • Increased temperatures reduce the pot-life

Main applications:
  • Baby care parts: baby pacifiers , baby bottles, bottle caps, baby tableware, baby toys, etc.
  • Respiratory mask
  • Automotive applications: valves, gaskets, seals
  • Skin contact parts like liners
  • Balloons
 Mechanical properties:
GradeAppearance A/BDensity (g/ cm3)Hardness (Shore A)Tensile strength (MPa)Elongation at break (%)Tensile set
(%)
Tear strength (N/mm)Line shrinkage
(%)
Rebound (%)  
Test method ISO 2771ASTM D 2240ASTM D 412 Die CASTM D 412 Die CASTM D 412 Die CAST D624
Die B
ASTM D
D4029
ASTM D 7121  
  
LSR 6110Transparent1.07101.57554.35.12.521  
  
LSR 6115Transparent1.08153.58453.49.22.645  
  
LSR 6118Transparent1.08175.18003.5122.550  
  
LSR 6120Transparent1.09206.48102.6162.548  
  
LSR 6130Transparent1.10307.07002.6152.455  
  
LSR 6140Transparent1.11417.55602.7252.556  
LSR 6150Transparent1.12509.15501.7312.664  
  
LSR 6160Transparent1,12599.45101.6352.662  
LSR 6170Transparent1.13669.54100.8302.656  
LSR 6171Transparent1.13719.03550.8262.555  


Slabs 160mm*160mm*2mm at 177ºC cured for 5 minutes with hot mold. Compression set slabs at 177ºC cured for 10 minutes with cold mold. Compression set test condition:177ºC*22hours, 25%. These data are approx.
Please note: The typical properties are not intended for use in preparing specifications for any particular applications. Please contact our Technical Service Department for more detailed data.

Instruction of use:Cure is dependent upon molding temperature and part size. The same lot part A and B components of Sanesil LSR6100A/B are designed to be mixed in equal parts using standard liquid injection  molding processing equipment and techniques with the mixing temperature lower than 35°C. Airless mixing, metering and dispensing equipment are recommended for production operations. Accurate measuring and complete mixing are essential factors in obtaining consistent results.
 
Cleaning :Special care must be taken to assure clean moulds and a clean work area with no organic rubbers used on the same processing equipment. Traces of foreign materials can poison the catalyst and inhibit the cure. All metering and mixing equipment should be thoroughly cleaned. Polymer systems, which contain traces of amines, sulfur, nitrogen oxide, organotin compounds can interfere with the cure of this product and should be avoided.

Packaging:Sanesil LSR6100A/B  is available in 20 kg pails or 200 kg drums.

Storage and shelf life:
This series may be stored in the original, unopened container at a temperature between 0°C and 30°C, can be stored for 12 months from the date of manufacturing. Beyond this date, we no longer guarantees that the product meets the sales specifications.
 

Our factory:

Our testing equipment

 






 

Our equipment:



Liquid silicone products

 

Our certificates:

 





 

Dlivery & Shipment:

FAQ:

Q: Are you a factory or trading company?
A: We are  rubber raw material manufacturer and owned 3 factories.


Q: Where is the loading port and How do you ship the goods?
A: Our factory is nearby Shanghai Port, but loading port can be negotiated. We could ship by sea, by air or by express(EMS, UPS, DHL, TNT, FEDEX and etc). Please confirm with us before placing orders.

Q: How can we guarantee the products' quality?
A: All the products must be tested refers to key specifications during the production and final inspection before shipment.
 
Q: What about the lead time?
A: It depends on the order quantity you place the order. Usually sample needs 5-8 working days, mass production needs 15-30 days.








Product Tag:
Related categories:
Scroll to Top