Description
1, Undercarriage parts: track roller,carrier roller,sprocket,idler wheel,track link assy.
2, Recoil Spring and tension cylinder ,u yoke ,excavator track adjuster.
3, H-Link (bucket link) and I-link(link rod), track guard.
4, GET :bucket, Cutting edge, End bit, Bucket teeth, Bucket adapter, Side cutter.
5, Pin and bushing: track pin and bushing, Bucket bushing and pin, Bucket ear,Shaft sleeve, bolts and nuts.
6, Hydraulic part: Boom cylinder, Arm cylinder, Bucket cylinder.
Rubber tracks conversion system for trucks
Specification:
- CNC Machined Billet Aluminum
- Full bearing setup
- All terrain rubber track conversion system
- Adjustable track tension
- Larger drive wheel for more speed
- Double arms for more realistic setup
- Better scale design
- Engineered by RC4WD UK
- Manufactured by RC4WD
- Hex:12mm
Notes:
- This is enough to prep one axle. In order to do a 2 axle truck, you will need two of this item.
- These require a fitting kit to be used for proper mounting and use.
- With only one pair installed on a truck, you will have a gearing change between the normal wheels and the Tracks. If mounting the tracks on the front it will cause push / under steer.
- We recommend the use of these tracks on all corners of the truck for best results.
- Brushless system and higher gearing is suggested, but not required.
- Threadlock is requires on all screws on the tracks before use.
Capable
- Greatly improved traction
- Exceptional floatation with very low ground pressure
- Matches or exceeds wheeled hauling capability
- Maximum performance when pulling implements
- Exclusive technologies for superior performance
Reliable
- Outstanding durability
- Ten years of ATV track system innovation, engineering, and marketing
- Half-century heritage of molded track manufacturing
- Warranty coverage
Versatile
- Systems for virtually all 4WD ATVs 300cc and up including side-by-sides and 6-wheelers.
Safe
- Greater vehicle stability
- Remarkable operational control
Easy
- Easy switch from wheels to track systems
- Easy maintenance
| Model: | HK6-320 | Length: | 1110mm |
Packing: | Simple/Cardboard Box/Iron Frame | Width: | 320mm |
Height: | 810mm |
Material: | Alufer | Net Weight: | 100KG |
Ground Contact Length: | 850mm | Load bearing: | 3T |
Sprocket Center Distance to the Ground: | 555mm |
Links for Rubber Track: | 33 |
Applicable Type of Vehicles: | Off-road vehicles/pickup truck/3.0 tons of the following vehicles |
The highest speed limit requirements: | 50km/H |
Remarks: a set of includes four separate assembly;The size of the form of three high for a single assembly. | For off-road product, but do not represent can pass any terrain, you like take care of your car, please take care of this product |